-
CMT 253.060.10 ITK Xtreme 10 In 60 Tooth Sliding Fine Finish Miter Saw Blade
CMT USA 253.060.10 ITK Xtreme 10 In 60 Tooth Sliding Fine Finish Miter Saw Blade - NEW DESIGN CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly...- $41.97
$69.90- $41.97
- Unit price
- per
-
CMT 281.096.12M INDUST. BLADE 300x96x3.2x30mm
Application: For sizing cuts, perfect finishing without using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 300Number of cutting edges 96Bore diameter 30Pin hole COMBI3Kerf thickness 3,2Plate thickness 2,2Hook angle 10°Type of grind TCG- $112.97
$150.00- $112.97
- Unit price
- per
-
CMT 281.080.10M INDUST. BLADE 250x80x3.2x30mm
Application: For sizing cuts, perfect finishing without using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 250Bore diameter 30Pin hole COMBI3Number of cutting edges 80Kerf thickness 3,2Plate thickness 2,2Hook angle 10°Type of grind TCG- $92.97
$140.00- $92.97
- Unit price
- per
-
-
CMT P12096N ITK-PLUS® NON-FERROUS METAL & COMPOSITE DECKING 12”x1” T=96 TCG
Application: for heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions. Machines: radial arm saws, miter saws, table and special saws. Material: aluminum, brass, copper, PVC and non-ferrous metals.- $61.97
$102.80- $61.97
- Unit price
- per
-
CMT P12096 ITK-PLUS® MELAMINE & ULTRA FINISH 12”x1” T=96 ATB+SHEAR
Application: for crosscuts, fine finishing on two-sided laminated panels without the scoring blade. Machines: radial arm saws, miter saws, table saws. Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard.- $61.97
$102.80- $61.97
- Unit price
- per
-
CMT P12072S ITK-PLUS® FINISH SLIDING COMPOUND 12”x1” T=72 ATB+SHEAR
Application: for fine finish crosscuts. Glass-smooth finish on your miter cuts. Machines: compound miter saws. Material: soft and hardwood, plywood, double-sided laminates.- $52.47
$91.35- $52.47
- Unit price
- per
-
CMT P12072L ITK-PLUS® CHIPBOARD & MELAMINE 12”x0.102”x0.071”x1” T=72 TCG
Application: for heavy-duty crosscuts, perfect finishing on single-sided laminated panels. Machines: radial arm saws, miter saws, table and special saws. Material: chipboard, MDF, laminates, hardwood and plywood.- $52.47
$91.35- $52.47
- Unit price
- per
-
CMT P12072 ITK-PLUS® FINISH 12”x0.102”x0.071”x1” T=72 ATB+SHEAR
Application: for fast extra-clean crosscuts and occasional rip as well. Machines: radial arm saws, miter saws, table saws. Material: soft/hard wood and plywood.- $45.97
$78.65- $45.97
- Unit price
- per
-
CMT P10080 ITK-PLUS® MELAMINE & ULTRA FINISH 10”x5/8” T=80 ATB+SHEAR
Application: for crosscuts, fine finishing on two-sided laminated panels without the scoring blade. Machines: radial arm saws, miter saws, table saws. Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard.- $47.97
$80.75- $47.97
- Unit price
- per
-
CMT P10060S ITK-PLUS® FINISH SLIDING COMPOUND 10”x5/8” T=60 ATB+SHEAR
Application: for fine finish crosscuts. Glass-smooth finish on your miter cuts. Machines: compound miter saws. Material: soft and hardwood, plywood, double-sided laminates.- $40.97
$71.30- $40.97
- Unit price
- per
-
CMT P10060 ITK-PLUS® FINISH 10”x0.094”x0.063”x5/8” T=60 ATB+SHEAR
Application: for fast extra-clean crosscuts and occasional rip as well. Machines: radial arm saws, miter saws, table saws. Material: soft/hard wood and plywood.- $35.97
$61.80- $35.97
- Unit price
- per
-
CMT P08040 ITK-PLUS® FINISH 8-8-1/4”x0.067”x0.039”x5/8”<> T=40 ATB+SHEAR
Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.- $24.97
$41.50- $24.97
- Unit price
- per
-
CMT P07540-X10 ITK-PLUS® ULTIMATE FINISH V-DRIVE 7-1/4”x5/8”<> (10-PC. BULK MASTERPACK)
Application: for framing/decking and general construction. Faster cuts thanks to special V-DRIVE teeth. Machines: corded and cordless circular saws. Material: wood with nails, lumber, plywood, OSB sheets.- $146.70
$251.00- $146.70
- Unit price
- per
-
CMT P07140-X10 ITK-PLUS® FINISH FOR PLYWOOD 7-1/4”x5/8”<> (10-PC. BULK MASTERPACK)
Application: for smooth finish crosscuts. Machines: circular & cordless saws. Material: plywood, laminates, plastic, veneered.- $69.70
$121.00- $69.70
- Unit price
- per
-
CMT P07060-X10 ITK-PLUS® ULTRA FINISH 7-1/4”x5/8”<> (10-PC. BULK MASTERPACK)
Application: for crosscut, perfect finishing. Machines: portable and cordless circular saws. Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.- $169.70
$289.00- $169.70
- Unit price
- per
-
CMT P07060 ITK-PLUS® ULTRA FINISH 7-1/4”x0.067”x0.039”x5/8”<> T=60 ATB+SHEAR
Application: for crosscut, perfect finishing. Machines: portable and cordless circular saws. Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.- $17.97
$30.35- $17.97
- Unit price
- per
-
CMT P07040-X10 ITK-PLUS® FINISH 7-1/4”x5/8”<> T=40 ATB+SHEAR (10-PC. BULK MASTERPACK)
Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.- $119.70
$230.00- $119.70
- Unit price
- per
-
CMT P07040 ITK-PLUS® FINISH 7-1/4”x0.067”x0.039”x5/8”<> T=40 ATB+SHEAR
Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.- $12.97
$24.05- $12.97
- Unit price
- per
-
CMT P06540-X10 ITK-PLUS® ULTIMATE FINISH V-DRIVE 6-1/2”x5/8”<> (10-PC. BULK MASTERPACK)
Application: for framing/decking and general construction. Faster cuts thanks to special V-DRIVE teeth. Machines: corded and cordless circular saws. Material: wood with nails, lumber, plywood, OSB sheets.- $146.70
$251.00- $146.70
- Unit price
- per
-
CMT P06060 ITK-PLUS® ULTRA FINISH 6-1/2”x0.067”x0.039”x5/8”<> T=60 ATB+SHEAR
Application: for crosscut, perfect finishing. Machines: portable and cordless circular saws. Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.- $17.97
$31.40- $17.97
- Unit price
- per
-
CMT P06036 ITK-PLUS® FINISH 6-1/2”x0.067”x0.039”x5/8”<> T=36 ATB+SHEAR
Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.- $12.97
$24.05- $12.97
- Unit price
- per
-
CMT K20010 ITK CONTRACTOR Finish for Plywood 10’’x0.095”/0.071”x5/8” <> T=200
Application: for smooth finish crosscuts. Machines: table & miter saws. Material: plywood, OSB, plastic, veneered.- $10.47
$18.40- $10.47
- Unit price
- per
-
CMT K14007-X10 ITK CONTRACTOR FINISH FOR PLYWOOD 7-1/4’’x0.079”/0.047”x5/8” <> T=140
Application: for smooth finish crosscuts. Machines: circular & cordless saws. Material: plywood, OSB, plastic, veneered.- $44.70
$8.55- $44.70
- Unit price
- per
-
CMT K08012 ITK CONTRACTOR FINE FINISH 12’’x0.102”/0.071”x1” T=80 ATB
Application: for fine finishing crosscuts. Machines: radial arm saws, miter saws, table saws. Material: soft/hard wood, plywood and laminate.- $30.97
$52.40- $30.97
- Unit price
- per
-
CMT K08010 ITK CONTRACTOR FINE FINISH 10’’x0.094”/0.063”x5/8” T=80 ATB
Application: for fine finishing crosscuts. Machines: radial arm saws, miter saws, table saws. Material: soft/hard wood, plywood and laminate.- $23.97
$40.95- $23.97
- Unit price
- per
-
CMT K06012 ITK CONTRACTOR FINISH 12’’x0.102”/0.071”x1” T=60 ATB
Application: for finishing crosscuts and occasional rip as well. Machines: portable benchtop and table saws. Material: soft/hard wood, plywood and OSB panels.- $25.97
$45.05- $25.97
- Unit price
- per
-
CMT K06010 ITK CONTRACTOR FINISH 10’’x0.094”/0.063”x5/8” T=60 ATB
Application: for finishing crosscuts and occasional rip as well. Machines: portable benchtop and table saws. Material: soft/hard wood, plywood and OSB panels.- $17.97
$31.40- $17.97
- Unit price
- per
-
CMT K06007 ITK CONTRACTOR ULTRA FINISH 7-1/4”x0.071”/0.047”x5/8”<> T=60 ATB
K03604 Includes rings for 3/8" bore and 10mm bore- $10.47
$17.80- $10.47
- Unit price
- per
-
CMT K04008 ITK CONTRACTOR FINISH 8-8-1/4’’x0.071”/0.047”x5/8”<> T=40 ATB
Saw blade K02405 includes reduction rings for 1/2" and 10mm bores. Application: for finishing crosscuts. Machines: portable and cordless circular saws. Material: soft and hardwood, panels lumber, plywood, OSB sheets.- $10.97
$19.10- $10.97
- Unit price
- per
-
CMT K04007-X10 ITK CONTRACTOR FINISH 7-1/4’’x5/8”<> T=40 ATB (10-PCS. BULK MASTERPACK)
Saw blade K02405 includes reduction rings for 1/2" and 10mm bores. Application: for finishing crosscuts. Machines: portable and cordless circular saws. Material: soft and hardwood, panels lumber, plywood, OSB sheets.- $59.70
$12.50- $59.70
- Unit price
- per
-
CMT K04007 ITK CONTRACTOR FINISH 7-1/4’’x0.071”/0.047”x5/8”<> T=40 ATB
Saw blade K02405 includes reduction rings for 1/2" and 10mm bores. Application: for finishing crosscuts. Machines: portable and cordless circular saws. Material: soft and hardwood, panels lumber, plywood, OSB sheets.- $8.97
$15.65- $8.97
- Unit price
- per
-
CMT K03606 ITK CONTRACTOR FINISH 6-1/2’’x0.071”/0.047”x5/8”<> T=36 ATB
Saw blade K02405 includes reduction rings for 1/2" and 10mm bores. Application: for finishing crosscuts. Machines: portable and cordless circular saws. Material: soft and hardwood, panels lumber, plywood, OSB sheets.- $11.97
$20.20- $11.97
- Unit price
- per
-
CMT K03604 ITK CONTRACTOR ULTRA FINISH 4-3/8”x0.059”/0.039”x5/8”<> T=36 ATB
K03604 Includes rings for 3/8" bore and 10mm bore- $11.97
$21.55- $11.97
- Unit price
- per
-
CMT 294.080.11M ULTRA FINISH - PLYWOOD & MELAMINE 260x0.098”/0.071”x30mm T=80 ATB
CMT Circular Saw Blades CMT 294.080.11M Ripping-Crosscut Saw Blade 260 x 2.5/1.8 x 30 Z=80 ATB -5 degree MACHINES: Circular Saw, Mitre Saw and Table Saw. APPLICATIONS: Crosscut. MATERIALS: Wood, OSB, Plywood, Melamine and Laminate.- $84.98
$125.90- $84.98
- Unit price
- per
-
CMT 294.060.11M FINE FINISH 260x0.098”/0.071”x30mm T=60 ATB
CMT 294.060.11M Fine Cut Saw Blade260 x 2.5/1.8 x 30 Z60 ATB -5 degree Neg MACHINES: Circular Saw, Mitre Saw and Table Saw. APPLICATIONS: Crosscut. MATERIALS: Wood, OSB, Plywood, Melamine and Laminate. All images are provided to us by the manufacturer for illustrative purposes only. Please see...- $73.64
$109.10- $73.64
- Unit price
- per
-
CMT 292.210.48M FINE FINISH 8-1/4”x0.110”/0.071”x30mm T=48 ATB
CMT 292.210.48M Fine Cut for Festool 210 x 48 30mm Bore Saw Blade Application: for crosscuts. Perfect finish. Machines: table and miter saws, portable machines. Material: soft, hard and exotic wood, wood-based panels, one-side veneered, paper-based laminated. Diameter 210Bore diameter 30Pin hole 2/7/42Number of cutting edges 48Kerf...- $43.67
$64.70- $43.67
- Unit price
- per
-
CMT 292.160.40H FINE FINISH 160x0.087”/0.062”x20mm T=40 ATB
CMT 292.160.40H Fine Cut for Festool 160 x 40 20mm Bore Saw Blade Application: for crosscuts. Perfect finish. Machines: table and miter saws, portable machines. Material: soft, hard and exotic wood, wood-based panels, one-side veneered, paper-based laminated. Diameter 160Bore diameter 20Pin hole 2/6/32Number of cutting edges 40Kerf...- $32.09
$47.55- $32.09
- Unit price
- per
-
CMT 285.708.18 FINE FINISH 18”x0.150”/0.110”x1” T=108 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $209.00
$320.15- $209.00
- Unit price
- per
-
CMT 285.696.16 FINE FINISH 16”x0.137”/0.098”x1” T=96 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $135.97
$209.90- $135.97
- Unit price
- per
-
CMT 285.696.12 ULTRA FINISH 12”x0.118”/0.098”x1” T=96 ATB
This saw blade is part of the CMT Industrial Orange Chrome/Xtreme premium line of blades. This is one of CMTs highest performing saw blades and designed for professional woodworkers who require high precision and durability. The special chrome carbide reduces tooth abrasion and the...- $114.97
$177.25- $114.97
- Unit price
- per
-
CMT 285.684.14 FINE FINISH 14”x0.137”/0.098”x1” T=84 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $129.97
$199.40- $129.97
- Unit price
- per
-
CMT 285.680.12 FINE FINISH SLIDING COMPOUND 12”x0.094”/0.071”x1” T=80 ATB
Application:for fine finish crosscuts. The 5° negative hook angle limits splintering and “climbing”. Machines: radial arm saws and sliding compound miter saws. Material: soft/hardwood, plywood and laminate.- $99.97
$157.30- $99.97
- Unit price
- per
-
CMT 285.680.10 ULTRA FINISH 10”x0.118”/0.098”x5/8” T=80 ATB
CMT 285.680.10 Orange Chrome Ultimate Crosscutting Blade 10 inch X T80 ATB Features: Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. Machines: radial arms saws, miter saws table and special saws Material: soft/hardwood plywood and chipboard. Low...- $89.97
$140.70- $89.97
- Unit price
- per
-
CMT 285.672.12M FINE FINISH 300x0.126”/0.087”x30mm T=72 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $103.48
$153.30- $103.48
- Unit price
- per
-
CMT 285.672.12 FINE FINISH 12”x0.126”/0.087”x1” T=72 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $99.97
$153.30- $99.97
- Unit price
- per
-
CMT 285.660.16M HEAVY-DUTY GENERAL PURPOSE 400x0.137”/0.098”x30mm T=60 ATB
ITEM CODE 285.660.16M Diameter 400mm Bore 30mm FT COMBI3 Teeth 60 Kerf 0.138″ Plate 0.098 Α 10° Β 15° ATB- $133.25
$197.40- $133.25
- Unit price
- per
-
CMT 285.660.10M FINE FINISH 250x0.126”/0.087”x30mm T=60 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $73.64
$109.10- $73.64
- Unit price
- per
-
CMT 285.660.10 FINE FINISH 10”x0.126”/0.087”x5/8” T=60 ATB
Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace. The circular saw blades of the...- $69.97
$109.10- $69.97
- Unit price
- per
-
CMT 283.696.12M ULTRA FINISH - PLYWOOD & MELAMINE 300x30mm T=96 Hi-ATB (-2° NEG)
CMT Orange Tools, 283.696.12M, 283-Series Saw Blade for Two-Sided Melamine 300mm x 30mm, 96 Tooth Application: For crosscuts. Perfect finish on both sides of double-sided laminated panels without using scoring blades. Machines: Radial arm saws, miter saws, circular saws, table and special saws with...- $148.84
$220.50- $148.84
- Unit price
- per