This saw blade is part of the CMT Industrial Orange Chrome/Xtreme premium line of blades. This is one of CMTs highest performing saw blades and designed for professional woodworkers who require high precision and durability. The special chrome carbide reduces tooth abrasion and the...

Application:for fine finish crosscuts. The 5° negative hook angle limits splintering and “climbing”.   Machines: radial arm saws and sliding compound miter saws.   Material: soft/hardwood, plywood and laminate.        

CMT USA 253.060.10 ITK Xtreme 10 In 60 Tooth Sliding Fine Finish Miter Saw Blade - NEW DESIGN CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly...

Application: for crosscuts, fine finishing on two-sided laminated panels without the scoring blade.   Machines: radial arm saws, miter saws, table saws.   Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard.

CMT 285.680.10 Orange Chrome Ultimate Crosscutting Blade 10 inch X T80 ATB Features: Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. Machines: radial arms saws, miter saws table and special saws Material: soft/hardwood plywood and chipboard. Low...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

CMT 281.660.10 Orange Chrome Heavy-Duty Multi Purpose Blade 10 inch X T60 TCG For heavy-duty crosscuts, perfect finishing on double-sided laminated panels Diameter 10"Bore Diameter 5/8"Number Of Cutting Edges 60Kerf Thickness 0.126Plate Thickness 0.087Hook Angle 10 deg.Type Of Grind TCG

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.   TRI-METAL BRAZING Special...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

CMT 219.090.12 Compound Miter Blade 12 x 90 1 inch Bore Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of German Steel (46-48 Rockwell...

CMT Circular Saw Blades CMT 219.080.10 Compound Miter Blade 10 x 80 5/8 inch Bore Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of...

CMT, 210.096.12 12" Bore Melamine & Fine Cut Saw Blade Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of German Steel (46-48 Rockwell in...

CMT Circular Saw Blades CMT 205.072.12 Cut Off Blade 12 x 72 1 inch Bore Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

ITEM CODE 281.697.12 D 12″ Z 96 B 1″ Β TCG K 0.126″ P 0.088″ Α -3°

ITEM CODE 281.696.12 DESCRIPTION D 12″ B 1″ FT Z 96 K 0.126″ P 0.088″ Α 5° Β TCG

CMT 281.681.10 Orange Chrome Double Sided Laminate /Melamine Blade 10 inch X T80 TCG Neg APPLICATION: for heavy-duty crosscuts, perfect finishing on double-sided laminated panels. MACHINES: radial arm saws, miter saws, table and special saws. MATERIAL: chipboard, MDF, laminate, hardwood and plywood. D 10"Z 80B 5/8"FTβ TCGK...

Applications:  for heavy-duty crosscuts, perfect finishing on single-sided laminated panels. Machines:  radial arm saws, miter saws, table and special saws Material: chipboard, MDF, laminate, hardwood and plywood. Finish quality: “Excellent” for crosscutting wood, and ripping/crosscutting plywood and one-sided laminate, CMT, 281.680.10, Orange Chrome Single Sided Laminate/Melamine...

Application: for fast extra-clean crosscuts and occasional rip as well.   Machines: radial arm saws, miter saws, table saws.   Material: soft/hard wood and plywood.

Tooth configuration: 4 ATB + 1 Raker Cutting Material: TC Expansion slots: Cu plugged Hook: 0° – Neg 15° Kerf: 0.120″ Bore: 1″ Teeth: 100T Diameter: 12" For mitre joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture...

FS Tool S23302 Industrial Carbide Tipped Saw Blade Manufacturer: FS Tool 300mm x 30mm, XL4000 Standard Cross Cut Saw Blades, TCG, 72 Teeth Part Number: S23302 Series Number: S23 Omga Diameter: 300mm Bore: 30mm Blade Type: Cross Cut Saw Blades Tooth Configuration: TCG Teeth:...

Tenryu Silencer Series Saw Blades SL-305100. 12" Dia., 100 Teeth, 1" Arbor, ATAF Grind, .110" Kerf, 5 Degree Rake. Ultra finish cutting. Silencer Body: Laser cut, resin filled slots for less noise and less vibration. PTFE coated plate: Reduces pitch build up and lowers...

Application: For sizing cuts, perfect finishing without using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 300Number of cutting edges 96Bore diameter 30Pin hole COMBI3Kerf thickness 3,2Plate thickness 2,2Hook angle 10°Type of grind TCG

Application: For sizing cuts, perfect finishing without using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 250Bore diameter 30Pin hole COMBI3Number of cutting edges 80Kerf thickness 3,2Plate thickness 2,2Hook angle 10°Type of grind TCG

Application: for heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions. Machines: radial arm saws, miter saws, table and special saws. Material: aluminum, brass, copper, PVC and non-ferrous metals.  

Application: for fine finish crosscuts. Glass-smooth finish on your miter cuts.   Machines: compound miter saws.   Material: soft and hardwood, plywood, double-sided laminates.

Application: for heavy-duty crosscuts, perfect finishing on single-sided laminated panels.   Machines: radial arm saws, miter saws, table and special saws.   Material: chipboard, MDF, laminates, hardwood and plywood.

Application: for crosscuts, fine finishing on two-sided laminated panels without the scoring blade.   Machines: radial arm saws, miter saws, table saws.   Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard.

Application: for fine finish crosscuts. Glass-smooth finish on your miter cuts.   Machines: compound miter saws.   Material: soft and hardwood, plywood, double-sided laminates.

Application: for fast extra-clean crosscuts and occasional rip as well.   Machines: radial arm saws, miter saws, table saws.   Material: soft/hard wood and plywood.

Application: for framing/decking and general construction. Faster cuts thanks to special V-DRIVE teeth. Machines: corded and cordless circular saws. Material: wood with nails, lumber, plywood, OSB sheets.

Application: for smooth finish crosscuts.   Machines: circular & cordless saws.   Material: plywood, laminates, plastic, veneered.

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.

Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.   BODY FLATNESS &...

ITEM CODE 274.691.12 D 12″ Z 90 B 5/8″ Β 4 ATB 20°+1 FLAT K 0.118″ P 0.098″ Α -3°

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.

Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.

Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.