Cross-Cutting Saw Blades

For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. For radial arm saws, miter/table & special saws. Cut chipboard, MDF, laminate, hardwood & plywood. 0.126 kerf thickness, 0.087 plate thickness, 10° hook angle, Trapezoidal tooth Grind. Micrograin carbide teeth to last longer and deliver...

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. Depth of cut (1/4" min to 1-5/8" max) Freud’s range of dedicated saw blades for picture frames and molding saw blades deliver superior finishes in solid wood...

10" x 50T Thin Kerf Combination Blade Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2"). The ultimate combination blade is now available in a thin kerf design for less amp draw and reduced material waste. This ultimate combination blade combines one flat tooth...

This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material...

This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades....

Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of German Steel (46-48 Rockwell in hardness) to guarantee great cutting performance, also in saws with...

CMT USA 253.060.10 ITK Xtreme 10 In 60 Tooth Sliding Fine Finish Miter Saw Blade - NEW DESIGN CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly...

For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. For radial arm saws, miter/table & special saws. Cut chipboard, MDF, laminate, hardwood & plywood. 0.126 kerf thickness, 0.087 plate thickness, 10° hook angle, Trapezoidal tooth Grind. Micrograin carbide teeth to last longer and deliver...

FS Tool L55250 Industrial Carbide Tipped Saw BladeManufacturer: FS Tool10'' x 5/8'', Combination Saw Blades, ATB, 50 TeethPart Number: L55250Series Number: L55Diameter: 10''Bore: 5/8''Blade Type: Combination Saw BladesTooth Configuration: ATBTeeth: 50Kerf: .138''Plate: .095''Design:Tooth configuration: 4 ATB & 1 RakerCutting material: TCFour ATB teeth and...

FS Tool S23302 Industrial Carbide Tipped Saw Blade Manufacturer: FS Tool 300mm x 30mm, XL4000 Standard Cross Cut Saw Blades, TCG, 72 Teeth Part Number: S23302 Series Number: S23 Omga Diameter: 300mm Bore: 30mm Blade Type: Cross Cut Saw Blades Tooth Configuration: TCG Teeth:...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

Each saw plate run-out less than .002" for flat true run. Built-in dampening system reduces vibration, making cuts quieter and more precise. Performs smooth, easy crosscuts and rips. Even does a great job on double sided laminates.Carbide tip material is an extra hard, C-4...

Application: for heavy-duty crosscuts, perfect finishing on single-sided laminated panels.   Machines: radial arm saws, miter saws, table and special saws.   Material: chipboard, MDF, laminates, hardwood and plywood.

Application: For sizing cuts. Perfect finish by using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 220Bore diameter 30Pin hole 2/7/42Number of cutting edges 64Kerf thickness 3,2Plate thickness 2,2Hook angle 10°Type of grind TCG

Fine Finish Blades For Sliding Miter & Radial Arm Saws. Depth of cut (1/2" min to 2-3/4" max) This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being...

Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2"). This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots,...

High quality crosscuts and rip cuts in wood, plywood & melamine Diablo's Fine Finish Saw Blade for Wood allows trim crews to get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting...

This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but...

Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. Depth of cut (1/4" min to 1-5/8" max) Freud’s range of dedicated saw blades for picture frames and molding saw blades deliver superior finishes in solid wood...

10" x 40T Thin Kerf Next Generation Premier Fusion General Purpose Blade for Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine. Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the...

Diablo's General Purpose Saw Blade for Wood is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades...

Freud offers a wide variety of application specific vertical and sliding table saw blades for the most popular equipment available in the market. Whether cutting plywood, melamine coated panels in man-made materials or natural wood materials Freud has it covered. As the world’s leader...