CMT - IWF PROMO

TECHNICAL DETAILS OF CARBIDE TEETH: Teeth height 296 series mm 6 Teeth height 297 series mm 8 ISO grade K10 Hardness (HV10) 1.765 Transverse rupture strength (N/mm2) 2.150   Pin hole COMBI3: 2/7/42 + 2/9.5/46.5 + 2/10/60. Non-low-noise saw blades:  297.064.09M   Application: for...

Application: for framing/decking and general construction. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: lumber, plywood, OSB sheets.

CMT Orange Tools, 230.520.06, 230-5-Series Precision Dado 6" x 6", 5/8" Bore, 20 Tooth 230.520.06 Includes : 2 Blades 6 Carbide tipped Four tooth chippers Shim set Features: Ideal for tongue & groove, shelving and rabbets in solid wood, laminates, melamine & veneered plywood. Orange...

CMT solid carbide spiral flush trim bits are composed of a special super-micrograin formulation increasing hardness with a higher transverse rupture point. Combined with a spiral cutting angle, CMT solid carbide spiral flush trim bits equipped with a double bearing, allow cabinet makers to...

Make beautiful traditional beads and edge beads or turn old beads into new moldings with the new CMT corner beading bits with bearing. Featuring carbide-tipped cutting edges and orange PTFE non-stick coating, these bits provide excellent results on corner beads. Run the bead twice...

These bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows, and rail and stile constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be molded. Cove bits can be...

#N/A

#N/A

TECHNICAL DETAILS: Premium quality HW. 2 HW precision ground cutting edges (Z2). Quick and easy drill change.   Twist drills Overall diameter Ø3mm (1/8") Ø11mm (7/16") Ø4mm (5/32") Ø12mm (15/32") Ø5mm (13/64") Ø13mm (1/2") Ø6mm (15/64") Ø14mm (9/16") Ø7mm (9/32") Ø15mm (19/32")  

ITEM CODE 285.036.16M DESCRIPTION INDUSTRIAL D 400mm B 30mm FT COMBI3 Z 36 K 0.138″ P 0.098″ Α 20° Β 10° ATB

Application: for crosscuts, fine finishing on two-sided laminated panels without the scoring blade.   Machines: radial arm saws, miter saws, table saws.   Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard.

Application: for framing/decking and general construction. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: lumber, plywood, OSB sheets.

Application: for framing/decking and general construction. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: lumber, plywood, OSB sheets.

Fast coarse cuts on softwood from 4mm to 60mm (5/32"~2-3/8"), plywood, OSB.

The JS956XHM sabre saw blade is ideal for cutting wood with nails or metal (nails/metal hardness up to 40 HRC), repairing pallets, plasterboard, plastics, glass fibre reinforced plastic/epoxy, fibre cement (<100mm). For rescue and demolition work.   SAFETY WARNINGS: Before use, read all warnings in...

For cutting wood with nails or metal, chipboard less than 150mm (6") in thickness, sheet metal, aluminium profiles from 3mm to 18mm (1/8" - 3/4") in thickness, glass fibre reinforced plastic/epoxy less than 150mm (6") in thickness.

The JS1110VF sabre saw blade is the perfect tool for cutting wood with nails or metal, chipboard, glass fibre reinforced with solid plastic epoxy, wood and metal wall cut-outs less than 175mm (7") in thickness. For rescue and demolition work.

Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent complexity. CMT’s new 305mm (12") dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy adjustments, we have taken...

An incredibly effective cleaner for all cutting tools! Saw shops know how to get the most out of cutting tools. They also know that pitch and residues that accumulate on tools greatly shorten the life of carbide and compromise performance. We asked various blade...

These bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows, and stile and rail constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be moulded. Cove bits can be used...

This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. We recommend using a top...

The smaller bearing on the CMT Beading bits makes a delicate inset at the base of the cut, giving you the advantage of an extra decorative option. Be sure to keep the black bearing washer right side up to correspond with the bearing rotation...

Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available...

The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike.     Shop Tips: Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the...

The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike.     Shop Tips: Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the...

Personalize your doors, drawer fronts, panels or any surface you choose with your own signature motif. CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any wood or wood product. We offer a complete selection of...

Make your house more energy efficient by insulating old doors and windows. The CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid tungsten carbide for strength and endurance, these bits reach up...

Whether you are a full time professional or a part time woodworking enthusiast, discover the unlimited possibilities of template routing with a CMT pattern bit. Pair up these double fluted bits with your choice of template to produce cabinet and furniture pieces, signs, toys...

Whether you are a full time professional or a part time woodworking enthusiast, discover the unlimited possibilities of template routing with a CMT pattern bit. Pair up these double fluted bits with your choice of template to produce cabinet and furniture pieces, signs, toys...

Whether you’re a full-time professional woodworker or part-time woodworking enthusiast, the CMT pattern bit is a valuable tool providing unlimited template routing possibilities. Pair up these double-fluted bits with a template of your choice and produce distinctive cabinets, furniture pieces, signs, toys and personalize any other...

3 in 1 new flush trim bits with Delrin® Triangular bearings are your best partner for laminate trimming. In fact, it solves three of the most common problems that occur when flush trimming:   1) The anti-stick properties of the Delrin® bearing greatly reduces the...

This bit is perfect for ensuring smooth flawless results on your laminate surfaces after flush trimming. Sharp edges are easily trimmed away, leaving your surfaces nice and smooth to the touch. No further filing is needed!   Shop tips: after resharpening, replace bearing 791.002.00...

We have designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs. For precision work on laminates or quick template work with excellent finishing.   Shop tips: these bits are excellent for making through mortises. Use a straight bit...

This router allows you to carry out accurate and functional finger joints with the greatest of ease. Without any adjustment you will be able to work woods with different thicknesses as indicated in the drawing. The bearing allows you to reach a 9,5mm cutting...

SAFETY RECOMMENDATIONS: be sure to keep the black shield right side up to correspond with the bearing rotation during reassembly.

Dimensions in table refer to L (length) x H (height) x K (thickness).   For machine and model list download the attached PDF.

Dimensions in table refer to L (length) x H (height) x K (thickness) TECHNICAL DETAILS: K1920 Hardness (HV10): 1.920 Transverse rupture strength (N/mm2): 2.600 New chrome grade for universal cutting applications. Excellent resistance to corrosion, oxidtion and mechanical wear. High efficiency, 20% longer lifetime compared to standard grade. K2250 Hardness...

For use in pair only.

We offer a traditional approach to panel construction with these CMT raised panel cutter heads. Make classic raised panels on furniture, interior and cabinet doors on solid wood and wooden boards, and achieve three different profiles by adjusting the cutting depth.   We recommend multiple passes...

These sets include 13 profile knives for making joints, frames, multiple profiles, moldings and chamfers. Ideal for the professional woodworker. The cutter head included allows the insertion of knives at a height of either 40mm or 50mm. Both cutter head and knives are stored in solid plastic...

Profile knives and limiters.

Profile knives and limiters.

New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.

New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.

It’s tough to beat the “old faithful” mortise and tenon joint for strength and accuracy, even with all the other joining options in the world of woodworking. It isn’t the easiest joint to make, but for sure it helps to have the best quality...

TECHNICAL DETAILS: SP steel. Long lasting cutter performance. Use our D=16mm bushing to increase the 13mm shank (order no. 799.130.00).   D mm D inches Max RPM Softwood Max RPM Hardwood <Ø16 <Ø5/8 1000 500 <Ø40 <Ø1-37/64 500 300 >Ø40 >Ø1-37/64 200 150  

TECHNICAL DETAILS: • Premium quality super-strength steel. • Spiral portion coating with black P.T.F.E. • Extra-fine micrograin carbide spiral portion. • 2 cutting edges (Z2). • 2 spiral flutes.

For use with the following items: 364-365.   TECHNICAL DETAILS: • Premium quality HWM. • 2 precision ground cutting edges (Z2). • 2 spiral flutes. • Common shank and drilling diametre (S=D).  

TECHNICAL DETAILS: • Super-strength steel. • ???????Cutter portion coated with orange or black P.T.F.E. • ???????HW head with precision balanced centre point. • ???????2 HW precision ground cutting edges (Z2). • ???????2 negatively ground spurs (V2). • ???????Parallel shank with driving flat and length...

TECHNICAL DETAILS: • Super-strength steel. • Spiral portion coated with orange or black P.T.F.E. • HW head with precision balanced centre point. • 2 HW precision ground cutting edges. • 2 negatively ground spurs (V2). • 2 spiral flutes. • Parallel shank with driving...