CMT - IWF PROMO

CMT 230.312.08 Locked Dado Pro Set CMT proudly presents the innovative and Patent Pending Locked Dado Pro Set, the first ever Dado blade compliant with UNI EN847 standards. This unique design ensures that while in use, the assembled elements never touch each other, enhancing...

A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on roller...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on roller...

CMT Orange Tools 250.324.07-X10 FRAMING Zero Gravity 7-1/4”x5/8” 10 Pack CMT Orange Tools Xtreme Zero Gravity blades have a patented design that reduces blade mass, minimizes heat, and substantially increases cutting efficiency with cordless and corded saws. The new gullet design is more efficient...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.   TRI-METAL BRAZING Special...

CMT 230.324.08 Precision 8" Locked Dado Pro Set (24-Tooth) Elevate your woodworking to industrial standards with the CMT 230.324.08 Precision Locked Dado Pro Set. Engineered for the professional cabinetmaker and the serious enthusiast, this 8-inch set is the pinnacle of precision, safety, and finish quality....

CMT’s lock miter cutter heads are ideal for milling miter joints in stock with maximum 28mm in thickness. Create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects.   Two easy steps to produce perfect fitting 45° miter joints: first, position...

These new XTreme flush trim bits guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology. 4 cutting edges in high quality carbide are crafted using special brazing techniques as well as unique positive and negative design thus eliminating splintering...

Straight coarse cut on softwood boards, thick construction timber from 5mm to 135mm (13/64"~5-5/16"), sandwich materials.

These new XTreme flush trim bits guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology. 4 cutting edges in high quality carbide are crafted using special brazing techniques as well as unique positive and negative design thus eliminating splintering...

CMT 219.090.12 Compound Miter Blade 12 x 90 1 inch Bore Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of German Steel (46-48 Rockwell...

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

An incredibly effective cleaner for all cutting tools! Saw shops know how to get the most out of cutting tools. They also know that pitch and residues that accumulate on tools greatly shorten the life of carbide and compromise performance. We asked various blade...

-Adjustable at 0.050mm (0.002") increments. -For groove width from 5mm (13/64”) to 13,5mm (17/32”). -Cut stock thickness from 12,7mm (1/2") to 31,7mm (1-1/4"). -Features micrograin carbide for longer life.

CMT 251.340.07 – Finish Zero Gravity Circular Saw Blade Deliver ultra‑smooth, professional‑grade finish cuts with the CMT Zero Gravity 7‑1/4" 40T ATB blade. Engineered for reduced cutting resistance and exceptional control, this blade combines a thin‑kerf design with premium carbide teeth to produce cleaner...

Application: for fast, smooth, heavy-duty rip cuts.   Machines: radial arm saws, miter saws, table and special saws.   Material: soft and hard wood.                

The innovative CMT333 Hinge Boring System with 3 spindle-heads allows you to bore holes for any hinge brand. The universal modular base supports the installation of many boring heads engineered by worldwide leading companies in the sector. Use the CMT333 hinge cup drill guide on all hand-held...

The possible uses of this bit are almost: you can rout grooves and rabbets, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange colored PTFE coating, it features anti-kickback design too. The 22mm (7/8") bearing...

CMT now offers you these industrial quality carbide-tipped router bits for flooring and inlay applications. They easily and smoothly run through solid and timber wood while cutting edges and remain sharp even after several passes 822.024.11B item number also features rounded edges to produce...

These versatile sets were designed to make furniture and doors on soft and hardwood. It allows the insertion of five different knives to produce the most popular and classical profiles. The adjustable cutter, included in the set, can also be used individually to carry out grooves...

  Range of cutting-edge saw blades with very low noise The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.  The circular saw blades of the...

For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. For radial arm saws, miter/table & special saws. Cut chipboard, MDF, laminate, hardwood & plywood. 0.126 kerf thickness, 0.087 plate thickness, 10° hook angle, Trapezoidal tooth Grind. Micrograin carbide teeth to last longer and deliver...

Application: for framing/decking and general construction. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: lumber, plywood, OSB sheets.

ITEM CODE 288.120.24H D 120mm B 20mm FT Z 24 K 0.122″ – 0.157″ P 0.098″ Α 5° Β CO+5°ATB

This saw blade is part of the CMT Industrial Orange Chrome/Xtreme premium line of blades. This is one of CMTs highest performing saw blades and designed for professional woodworkers who require high precision and durability. The special chrome carbide reduces tooth abrasion and the...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

CMT 226.572.10 Stainless Steel Blade 10 x 72 x 5/8 inch Application: For crosscutting a variety of materials such as iron, steel, pvc, compound materials, melamine. Machines: For “dry” crosscutting a variety of materials and ferrous materials such as iron, steel, pvc, compound materials,...

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

Model number: 292.210.64M Applications: fine finishing Machines: Circular & Mitre Saws (Festool Compatible) Material: solid soft and hardwood, plywood and laminates Size: 210mm Bore: 30mm Teeth: 56 Grind: 15° Alternate Top Bevel (ATB) Kerf: 1.8mm Plate thickness: 2.8mm Tooth hook angle: 15° Pin Holes:  2/6/32

Application: for crosscuts, fine finishing on two-sided laminated panels without the scoring blade.   Machines: radial arm saws, miter saws, table saws.   Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard.

Application: for fast cuts and improved durability on all fiber cement applications. Machines: portable circular saws. Material: HARDIEPLANK®, HARDIEPANEL®, DUROCK®, CEMPLANK®, CERTAIN TEED®, NICHIHA®, ideal for frequent & heavy use.

For cutting medium-sized bricks up to 215mm (8-1/2") in thickness.

These bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows, and stile and rail constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be moulded. Cove bits can be used...

“The Grand Rabbet” by CMT is an investment that shows your commitment to quality. This CMT product will deliver years of reliable service under normal use. For safe and trouble-free results please observe the following instructions and safety precautions. The complete kit (item code...

This bit features two tungsten carbide-tipped cutting edges for carving out solid surface undermount bowls in composite. For use on hand-held routers. Bit also equipped with a non-marring Delrin®bearing to protect your surfaces.  

CMT now offers you these industrial quality carbide-tipped router bits for flooring and inlay applications. They easily and smoothly run through solid and timber wood while cutting edges and remain sharp even after several passes 822.024.11B item number also features rounded edges to produce...

550-PH85 - PUSH&LOCK arbor Hex8.5 (11/32'') 550-PH11 - PUSH&LOCK arbor Hex11 (7/16'')   550-PD01 - Centering drill in HW, Ø7mm (17/64'') Bricks, Concrete Soft tiles   550-PD02 - Center drill in HSS, Ø6,35mm (1/4'') Wood MDF, laminate Plastic Steel, Stainless Steel, Aluminium, Copper, Brass...

CMT Orange Tools, 281.672.12M, 281.6-7 Ind. Low Noise and Chrome Coated Circular Saw Blade, 300 mm. Application: For sizing cuts, perfect finishing without using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 300mm Bore Diameter...

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table saws.   Material: soft/hard wood, plywood.

This bit takes the Roman ogee a step further. The horizontal bead adds style and elegance to the traditional shape. Shop tips: for best results, multiple passes are recommended.

Equipped with thick carbide tips and negative shear angle design, CMT mortising bits guarantee flawless performance. Mortise perfect hinges with no splintered edges or rough bottoms. Mortising is a breeze on both natural wood and wood composites. Compatible with most mortising jigs. Complete with...

Dimensions in table refer to L (length) x H (height) x K (thickness) TECHNICAL DETAILS: K1920 Hardness (HV10): 1.920 Transverse rupture strength (N/mm2): 2.600 New chrome grade for universal cutting applications. Excellent resistance to corrosion, oxidtion and mechanical wear. High efficiency, 20% longer lifetime compared to standard grade. K2250 Hardness...

These cutter heads are the ideal tools to create precision slots and grooves on material from 14 to 39mm deep. The 694.021-022 set includes: 1 cutter head type (A) [Z2 + V2]; 1 cutter head type (B) [Z2 + V2]; Spacer rings set.   For use on...

These cutter heads are the ideal tools to create precision slots and grooves on material from 14 to 39mm deep. The 694.021-022 set includes: 1 cutter head type (A) [Z2 + V2]; 1 cutter head type (B) [Z2 + V2]; Spacer rings set.   For use on...

CMT chamfer cutter heads carry out clean accurate bevels and joints for excellent edge work. For use on spindle moulder machines, double-end tenoner and shaper machines. Suitable for all materials, but ideal on solid wood, veneer, plywood and laminated materials.   Technical details Hard aluminium alloy...

These cutter heads are the ideal tools to create precision slots and grooves on material 4 to 15mm deep.   These sets include 2 cutter heads type (A) [Z4 + V4] 1 cutter head type (B) [Z2] 12 spacer rings from 0,1 to 2mm....