CMT - IWF PROMO

12" and 14" saw blades include 20mm and 7/8" bore reduction rings.   Application: for use by rescue/emergency squads & fire dept.   Machines: portable saws.   Material: wood, non-ferrous & sheet metal.   Warning: this blade is not to be used on multipurpose...

CMT 285.654.14M Saw Blade HW 350 x 3.5/2.5 x 30 Z54 15 ATB (Chrome) For Material: Hardwood, softwood, plywood, and melamine. Diameter: 350 mm Bore diameter: 30 mm PIN Hole: COMBI3 Kerf Thickness: 0.138'' Plate Thickness: 0.098'' All images are provided to us by the manufacturer for illustrative purposes...

CMT Orange Tools, 283.696.12M, 283-Series Saw Blade for Two-Sided Melamine 300mm x 30mm, 96 Tooth Application: For crosscuts. Perfect finish on both sides of double-sided laminated panels without using scoring blades. Machines: Radial arm saws, miter saws, circular saws, table and special saws with...

CMT Circular Saw Blades CMT 283.696.12 Orange Chrome Ultimate Plywood & Melamine Blade 12 inch X T96 Hi ATB Diameter 12"Bore Diameter 1"Number Of Cutting Edges 96Kerf Thickness 0.126Plate Thickness 0.087Hook Angle 2 deg.Type Of Grind HiATB 38 deg.

  Application: For crosscuts. Perfect finish on both sides of double-sided laminated panels without using scoring blades. Machines: Radial arm saws, miter saws, circular saws, table and special saws with 30mm arbor. Material: Solid wood, moldings, melamine, laminates, veneered plywood, chipboard. Diameter 350Bore diameter...

ITEM CODE 281.708.14M DESCRIPTION For sizing cuts. Perfect finishing without using scoring blades D 350mm B 30mm FT COMBI3 Z 108 K 0.138″ P 0.098″ Α 5° Β TCG

CMT 281.681.10 Orange Chrome Double Sided Laminate /Melamine Blade 10 inch X T80 TCG Neg APPLICATION: for heavy-duty crosscuts, perfect finishing on double-sided laminated panels. MACHINES: radial arm saws, miter saws, table and special saws. MATERIAL: chipboard, MDF, laminate, hardwood and plywood. D 10"Z 80B 5/8"FTβ TCGK...

CMT 281.660.10 Orange Chrome Heavy-Duty Multi Purpose Blade 10 inch X T60 TCG For heavy-duty crosscuts, perfect finishing on double-sided laminated panels Diameter 10"Bore Diameter 5/8"Number Of Cutting Edges 60Kerf Thickness 0.126Plate Thickness 0.087Hook Angle 10 deg.Type Of Grind TCG

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

Application: for smooth finish crosscuts. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: soft/hardwood, plywood.

Application: for framing/decking and general construction. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: lumber, plywood, OSB sheets.

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.   BODY FLATNESS &...

8,5" Compound Miter and Radial Blade Application: for fine finish crosscuts. The 5° negative hook angle limits splintering and “climbing”.Machines: radial arm saws and sliding compound miter saws.Material: soft/hard wood, plywood and double-sided laminate. Features: For fine finish crosscuts. The 5° negative hook limits splintering and...

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges...

Sharp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges...

TECHNICAL DETAILS: Super-strength steel. 3 cutting edge (Z3). 4 cutting edges (Z4).

Technical details: • Premium quality HWM. • Upcut spiral cutting edges [Z2/Z3]. • Excellent finish on the lower side of the work piece. • Upward chip ejection. Application: specially designed for 2D and 3D CNC profiling and carving in plastic, aluminum & wood for...

CMT 378.052.11 - DOWEL DRILL W/COUNT.SINK FOR THROUGH HOLES HW S=25/64''x25 Overall Diameter: 5mm Shank Diameter: 10x20mm Overall Length: 70mm

CMT 296.165.56H - THICK NON-FERROUS METAL & MELAMINE 6-1/2”x20mm T=56 TCG (-6° NEG) Diameter: 6-1/2'' Bore Diameter: 20mm Teeth: 56 Grind: TCG Hook Angle: -6°

CMT 299.000.09 - DADO PRO SHIM SET D=80 B=16 SP=1.7

CMT 695.007.12 - PAIR OF PROFILED KNIVES R=15/32’’ (34.8x29.3x2mm)

CMT 276.165.56H - NON-FERROUS METAL & COMPOSITE DECKING 6-1/2”x20mm (+5/8”) T=56 TCG Diameter: 6-1/2'' Bore Diameter: 20 (+15.88) Teeth: 56 Grind: TCG

CMT 256.060.12 - COMBINATION 12”x0.102”/0.071”x1’’ T=60 ATB+FLAT Diameter: 12'' Bore Diameter: 1'' Teeth: 60 Grind: ATB+FLAT

CMT 695.007.15 - PAIR OF PROFILED KNIVES R=19/32’’ (34.8x29.3x2mm)

CMT 251.348.06H - Finishing CSB ITK Orange HW 165X48ATB Bore-20mm+5/8inch Diameter: 6-1/2'' Bore Diameter: 20mm + 5/8" adapter  Teeth: 48 Grind: ATB

The go to blade for fiber cement Exceptional finish and durability Engineered for fast and effortless cuts Optimized for 7 1/4″ corded or cordless circular saws LOW MASS PLATE DESIGN Patented design that reduces blade mass minimizes heat and substantially increases cutting efficiency with...

Make classic raised panel doors by choosing from the profiles illustrated below. Its anti-kickback design is fundamental in further improving safety when working with larger diameter bits.   Safety Tips: This type of bit needs to be used at a lower rotational speed, preferably...

Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight...

Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight...

Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight...

These bits are the best tool for rounding over and trimming countertop edges after the bowl is mounted. Can be used together with the CMT 8/980.551.11 bevel cutter for a flush cut-out between the countertop and the installed undermount bowl. For use on hand-held...

Cut channels for pipes or cables in one single pass using CMT’s ball end bits. Reduce the stress on the bits by cutting a first groove with a straight bit.  

These profiles are the mirror image of the traditional roman ogee. They add sharp defining details to the edges of cabinets and furniture, before rolling into a smooth convex shape.   Shop tips: this type of machining can be very challenging, for best results,...

Why waste time searching for a particular style of frame molding when you can just as quickly and easily make your own. With the wide range of decorative possibilities offered by CMT molding bits, you can always create the edge profile you want, anywhere...

For best results use these bits with 1800W routers. It is possible to use 1100W routers but only for brief passes that are short in depth.   Shop tips: multiple pass operations require advance planning. To avoid making a mistake that could render it...

Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Two options are available: a template profile made directly in the wood or a European-style hardwood pull as illustrated below.  

This is a great set to create cost-effective, yet attractive durable edges to your cabinet doors. For use with 12,7mm or 25,4mm thick panels in plywood or MDF. Easy to use: center each cutter on the stock and make the cut; glue the two pieces...

CMT’s roundover sets give you the maximum flexibility for all of your projects by putting the most requested diameters in one package. Available in 12,7mm (1/2") and 6,35mm (1/4") shanks. Roundover radii are 6,35mm (1/4"), 9,5mm (3/8") and 12,7mm (1/2"). These versatile bits are...

#N/A

#N/A

#N/A

#N/A

#N/A

If you are looking to get the most out of your time and money through more efficient production, but want nothing. This double edged cutter is made of special Fatigue Proof® steel and micrograin carbide to withstand even the heaviest of workloads. The surface...