Diablo Saw Blades at Prime Source

Studs & Tubing (Wall thickness 1/8" (11 gauge) min 1/2" max); Plates & Bars (Thickness 1/4" (11 gauge) min 1" max); RODS (Diameter 1/2" min 2" max) - Studs/Channels, Angle Iron, Plates/Bars, Pipes/Tubes, EMT Conduit, Threaded Rod Diablo’s Steel Demon™ Cermet II saw blades...

High quality crosscuts and rip cuts in wood, plywood & melamine Diablo's Fine Finish Saw Blade for Wood allows trim crews to get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting...

Diablo's next generation Saw Blades for Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and...

Studs & Tubing (Wall thickness 1/16" (16 gauge) min 1/4" max); Plates & Bars (Thickness 1/8" (11 gauge) min 1/2" max); RODS (Diameter 1/4" min 1-1/2" max) - Studs/Channels, Angle Iron, Plates/Bars, Pipes/Tubes, EMT Conduit, Threaded Rod Diablo’s Steel Demon™ Cermet II saw blades...

Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Flawless crosscuts...

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Diablo's next generation Saw Blades for Thin Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts...

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Diablo's next generation saw blades for aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and...

Diablo's next generation Saw Blades for Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and...

Diablo's Fine Finish Saw Blades for Wood let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing”...

Diablo's Ripping Saw Blade for Wood cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control...

Diablo's Wood Demon™ Ultimate Finish saw blade sets a higher standard for quality and precision that on-the-go fine carpenters demand. It delivers sandpaper-like finish cuts and boosts productivity up to 10X longer than standard blades. Crafted with custom-formulated TiCo Hi-Density carbide teeth featuring Dura-Blend™,...

Diablo's Saw Blades for Thick Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo high-performance TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and...

Diablo’s Steel Demon™ Carbide Saw Blades for Thin Metal produce fast, accurate cuts in a wide-range of mild steels. These blades feature high-performance TiCo™ Hi-Density carbide engineered exclusively to deliver maximum performance, superior quality cuts and longer life when compared to standard grinding discs....

Next generation 7-1/4” 24T Framing Blade with Tracking Point™ Tooth design delivers maximum life and durability with effortless cutting performance. Up Your Cutting Game with this one-of-a-kind Tracking Point™ tooth grind for unmatched cutting performance and efficiency. This is the only 7-1/4” blade on the...

Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in...

Diablo's Finish Trim Saw Blade for Wood is ideal for portable and low powered saws on the jobsite. Diablo's trim saw blade is proven to extend run time on Dewalt and similar trim saws.

Diablo's finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. These blades are the perfect choice when seeking high quality rips and crosscuts using a portable saw. The combination of Diablo’s application specific TiCo Hi-Density carbide teeth and a super...

Diablo's innovative Framing Saw Blade for Wood is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin...

Diablo’s new Ultimate Polished Finish Saw Blades for Wood feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional...

Diablo's General Purpose Saw Blade for Wood is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades...

Diablo's next generation Aluminum saw blades are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last...

Make splinter-free cuts and flat bottom grooves with Diablo's Carbide Stacked Dado Saw Blade Set. The set includes blades, wing chippers and shims designed to fit 5/8" laser cut arbors for accurate blade rotation. The negative hook angles make flat bottom grooves and virtually...

Diablo's Fine Finish Saw Blades for Wood are designed for large capacity beam, post and timber cutting. 16-5/16-Inch Beam Saw Blade is ideal for timber framing such as LVL, Gleams and Parlays. Cuts up to 6 1/4-Inch at 9 Degrees and 4 3/16-Inch at...

Diablo's General Purpose Saw Blades for Wood are ideal for cutting oak, pine, plywood, pressure treated lumber, wood composites, and beams. Ideal for timber framing such as laminated veneer lumber, glued timber (glulams),and Paralams.

Diablo's Fine Finish Saw Blades for Wood let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing”...

Diablo's TrexBlade™ Saw Blade is the only blade recommended by Trex Company for cutting their composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a ‘must-have’ tool for both professionals and DIYers planning composite decking projects. Diablo's...

Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by...

Diablo's PergoBlade™ Saw Blade for Laminate and Wood Flooring is the ultimate flooring saw blade and the first blades specifically designed for cutting laminate flooring in all saws. These blades are not only ideal for cutting laminate flooring, but also outperform carbide-tipped blades when...

Diablo’s Ultimate Polished Finish Saw Blade for Wood feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds,...

Diablo HardieBlade™ Saw Blade is the only PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products. Diablo Fiber Cement Blades generate up to 50% less respirable dust*, while delivering the longest life in all fiber cement materials. Diablo's HardieBlades™ feature...

Diablo's next generation Saw Blades for Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and...

Diablo's TrexBlade™ Saw Blade for Composites and Plastic is the only blade recommended by Trex Company for cutting their composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a ‘must-have’ tool for both professionals and DIYers planning...

Diablo's Fine Finish Saw Blades for Wood let users get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or...

Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by...

Diablo's general purpose saw blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks....

Diablo's General Purpose Beam Saw Blade for Wood is specifically designed for use on a wormdrive saw (5/8" diamond knockout). Cuts 4X headers and fence posts, 2X sandwiched headers, exposed beams for decks and porches and 7 sheets of 1/2" plywood with one pass.

Diablo's Wood Demon™ Ultimate General Purpose saw blade sets a new standard for quality cuts in general purpose applications with up to 10X more productivity in trim work, cabinets, sheet goods and more. This technology rich blade includes the ultimate trifecta for creating superior...

Diablo's general purpose saw blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks....

Diablo’s Plywood Ripping Saw Blade features an exclusive Tracking Point tooth design and enhanced anti-vibration design for superior cutting performance in plywood ripping applications. Sheathing walls and roofs just got easier thanks to the specially formulated Diablo made TiCo™ carbide tips coupled with the...

Diablo's PergoBlade™ Saw Blades for Laminate and Wood Flooring are the first blades specifically designed for cutting laminate flooring in all saws. These blades are not only ideal for cutting laminate flooring, but also outperform carbide blades when cutting other flooring materials such as...

Diablo's HardieBlade™ Saw Blade for Fiber Cement recommended by James Hardie Building Products. Diablo Fiber Cement Blades generate up to 50% less respirable dust*, while delivering the longest life in all fiber cement materials. Diablo's polycrystalline diamond (PCD) blades feature a unique, spark-eroded Triple...

Diablo’s Steel Demon Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Diablo’s Fine Finish Saw Blades for Wood offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions and portability needed on professional construction jobsites. These blades are the perfect choice for excellent rips and crosscuts using a portable saw....

Diablo's Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in “S” are also ideal for radial arm saws).

Diablo’s Steel Demon™ saw blades produce fast, accurate cuts in a wide range of metal and mild steels. These blades feature Diablo made TiCo™ Hi-Density Carbide engineered exclusively to deliver maximum performance, superior quality cuts and longer life when compared to standard grinding discs....

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Diablo's Finishing Saw Blade for Wood is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide...