CMT - IWF PROMO

  For chucks: 183.000/100/200/250/300/400 Technical details: Replaceable Standard Precision 0.015 collets. 0; -0,7mm wide clamping tolerance. Replaceable High Precision 0.005 collets. 0; -1mm wide clamping tolerance. Suitable for most conical chucks. Fit most tapered spindle noses.   Special dimensions available on request.

Max saw blade Ø350 for chuck 183.422.30. Always respect the maximum RPM indicated on the blade.   Safety Tips: The TW-006 Torque Screwdriver is recommended for the proper fastening of screws. Grooving saw blades available on request.

CMT 695.007.10 Pair of Knives for Roundover and Cove Cutter Head, 25/64-Inch Radius

CMT USA 253.060.10 ITK Xtreme 10 In 60 Tooth Sliding Fine Finish Miter Saw Blade - NEW DESIGN CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly...

The CMT male-female rail and stile sets are a perfect pair for this particular project and produce clean, precise and well-crafted joints. Designed for working in stock from 18mm to 22mm.    Shop tips: quality workmanship is the result of a lot of trial...

These bits has a back-cutter which allows milling of both the front and back of the panel in the same cut. An additional 31,7mm (1-1/4") diameter bearing promotes safety by allowing you to take two shallow passes by using the Ø89mm (3-1/2") bit only.

Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side. A first pass with the over-hang bit cleans the cut-out edge, leaving a slight...

These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT’s MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance.  Featuring large cutting diameters...

These bits are the best tool for rounding over and trimming countertop edges after the bowl is mounted. Can be used together with the CMT 8/980.551.11 bevel cutter for a flush cut-out between the countertop and the installed undermount bowl. For use on hand-held...

These bits are designed for undermount applications joining the countertops and sink bowls with a 10 (degree) beveled edge. Can be used with the 880.541.11 and 880.542.11 for complete undermount applications. For use on hand-held routers. Features a non-marring Delrin® bearing to protect the...

The cavetto bit cuts beautiful, traditional profiles, but you may also use just a portion of the bit to cut a more simple and cleaner cove edge. This bit adds a special touch to furniture pieces by making traditional cove profiles with top and...

The cavetto bit cuts beautiful, traditional profiles, but you may also use just a portion of the bit to cut a more simple and cleaner cove edge. This bit adds a special touch to furniture pieces by making traditional cove profiles with top and...

The edge-fluting bearing guided bits are quick to set up and can be used for curved screens, small radius grooves, doors etc. No side fence is required. Use in a handheld or table-mounted router.  

The edge-fluting bearing guided bits are quick to set up and can be used for curved screens, small radius grooves, doors etc. No side fence is required. Use in a handheld or table-mounted router.  

The edge-fluting bearing guided bits are quick to set up and can be used for curved screens, small radius grooves, doors etc. No side fence is required. Use in a handheld or table-mounted router.  

This new router bit designed for 19mm (3/4”) thick stock is perfect for creating panels on your walls. Simply create a 6,35mm (1/4”) tongue-and-groove interlock with a CMT 8/900.626.11, then, with two passes mill an attractive traditional beadboard profile with this new bit. Perfect for cabinets, bookcase backings, ceiling and...

Make beautiful traditional beads and edge beads or turn old beads into new moldings with the new CMT corner beading bits with bearing. Featuring carbide-tipped cutting edges and orange PTFE non-stick coating, these bits provide excellent results on corner beads. Run the bead twice...

Make beautiful traditional beads and edge beads or turn old beads into new moldings with the new CMT corner beading bits with bearing. Featuring carbide-tipped cutting edges and orange PTFE non-stick coating, these bits provide excellent results on corner beads. Run the bead twice...

These profiles are the mirror image of the traditional roman ogee. They add sharp defining details to the edges of cabinets and furniture, before rolling into a smooth convex shape.   Shop tips: this type of machining can be very challenging, for best results,...

#N/A

CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams...

The 8/956.601.11 guarantees well-proportioned smooth curves. Complete the job with the 8/956.701.11 bit featuring a 30° bevel edge and a 3.2mm bead for beautifully functional hand rails.   Safety tips: these profile bits remove large amounts of stock and produce consistent quantities of dust....

Originally intended for shaping window sill edges, these bits are also used for creating finger pulls on your door and drawer edges.

CMT’s unique stile and rail router bit sets allow you to produce glass panel doors by using a rubber panel retain to secure the glass in a 3,2mm (1/8") slot cut into the frames. These bits work the same as other CMT’s stile and...

This is a great set to create cost-effective, yet attractive durable edges to your cabinet doors. For use with 12,7mm or 25,4mm thick panels in plywood or MDF. Easy to use: center each cutter on the stock and make the cut; glue the two pieces...

Use this pair of bits to produce octagonal shaped boxes and popular corner cabinetry for kitchens, kitchen islands, entertainment centres and corner hutches. This 22.5° Lock Miter set provides a strong tight joint even at 45°angles.  After the joints are machined, they can be...

The key to success when constructing quality drawers is in the quality of the drawer lock bit you use. With CMT drawer lock bits you can make strong, perfectly fitting joints quickly and easily. Mill the drawer front with the inside face-down on the...

#N/A

#N/A

#N/A

CMT’s roundover sets give you the maximum flexibility for all of your projects by putting the most requested diameters in one package. Available in 12,7mm (1/2") and 6,35mm (1/4") shanks. Roundover radii are 6,35mm (1/4"), 9,5mm (3/8") and 12,7mm (1/2"). These versatile bits are...

#N/A

#N/A

#N/A

Build beautiful planters, boxes and other multi-sided pieces with this handy set. Why cut imperfect angles on your table saw when it’s so much easier and accurate to use the CMT Chamfer set? Our solution to accurate polygon construction includes 5 anti-kickback, carbide tipped...

#N/A

#N/A

#N/A

#N/A

Each of these sets include 3 of the most widely used CMT Round Nose bits. These solid carbide or carbide tipped bits are perfect for sign making, engraving, or adding flutes and veins to doors or drawer fronts. Available in 6,35mm (1/4") and 12,7mm...

CMT has developed a tongue and groove cabinet making system that derives from the superior traditional European methods of joinery. Combine the CMT tongue and groove system with the ease and speed of new world pocket hole methods and you have the versatility to...

Open new doors with CMT! Our 3 piece kitchen sets include a couple of rail and style bits and a raised panel bit. Choose among 4 possible profiles to make panel doors easy and economical. Each bit is made from bar stock steel and...

TECHNICAL DETAILS: Super strength steel. 2 HW precision ground cutting edges [Z2]. Parallel exagonal shank. Right-hand rotation (RH).

Application: For sizing cuts, perfect finishing without using scoring blades. Machines: Table saws, horizontal and vertical sizing machines. Material: Single or double-sided laminated panels. Diameter 250Bore diameter 30Pin hole COMBI3Number of cutting edges 80Kerf thickness 3,2Plate thickness 2,2Hook angle 10°Type of grind TCG

CMT is proud to offer you these new sets of high quality solid tungsten carbide upcut and downcut spiral bits in the most popular diametres. The new formulated super micrograin composition guarantees extremely sharp long-lasting cutting edges, whereas the spiral layout allows for a...

The interchangeable torque wrench is supplied inside a protective case. Inside, in addition to the instruction manual, you’ll find the calibration certificate (unique for each instrument) according to DIN ISO 6789 & ASME B107.300-2010. TECHNICAL DETAILS: • Range:.............. 20~200 Nm (10-150 lbf-ft) • Resolution:.............

The TW-006 adjustable torque screwdriver by CMT is supplied inside a sturdy protective case and comes equipped with 20 bits, instruction manual and calibration certificate (unique for each instrument) indicating compliance with DIN ISO 6789 and ASME B107.300-2010 standards.   Technical features: Range................... 1~6...