CMT - IWF PROMO

The interchangeable torque wrench is supplied inside a protective case. Inside, in addition to the instruction manual, you’ll find the calibration certificate (unique for each instrument) according to DIN ISO 6789 & ASME B107.300-2010. TECHNICAL DETAILS: • Range:.............. 20~200 Nm (10-150 lbf-ft) • Resolution:.............

The TW-006 adjustable torque screwdriver by CMT is supplied inside a sturdy protective case and comes equipped with 20 bits, instruction manual and calibration certificate (unique for each instrument) indicating compliance with DIN ISO 6789 and ASME B107.300-2010 standards.   Technical features: Range................... 1~6...

With a long, horizontal shape, these designs are perfect for door rails, headboards, cabinet face frames and valences. Approximate carving time is 4 minutes.

PGD-1 is the perfect router dado jig to make precise crafting dados, rabbets and joints quickly and with confidence. This CMT tool is easy to use and fully adjustable. You can create dadoes of any size using the same router by simply increasing the number of passes...

Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT’s professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily...

Application: for heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions. Machines: radial arm saws, miter saws, table and special saws. Material: aluminum, brass, copper, PVC and non-ferrous metals.  

Application: for fine finish crosscuts. Glass-smooth finish on your miter cuts.   Machines: compound miter saws.   Material: soft and hardwood, plywood, double-sided laminates.

Application: for fast rip and crosscuts.   Machines: radial arm saws, miter saws, table saws.   Material: soft/hard wood and plywood.  

Application: for framing/decking and general construction. Faster cuts thanks to special ground teeth. Machines: portable and cordless circular saws. Material: lumber, plywood, OSB sheets.

Application: for crosscut, perfect finishing.   Machines: portable and cordless circular saws.   Material: soft/hard wood, lumber, plywood, OSB sheets and melamine.

80mm Carbide Grit Delta Rasp   FEATURES: Carbide Grit.   MATERIAL: Delta Rasp for tiles, plasterboard, porous concretes, construction materials, wood, carpets.   APPLICATION: Removing mortar or tile adhesive, removing carpet adhesive residues, rasping wood for rough adjustment, rough grinding of filler, tile adhesives,...

45mm Extra-Long Life Plunge and Flush-Cut for Wood and Metal   FEATURES: TiN Coated Bimetal with 8% Cobalt teeth.   MATERIAL: Saw blade for wood and nails, plasterboard, plastic, sheet metal, copper and aluminium pipes and profiles.   APPLICATION: Flush cutting a nail, cutting...

32mm Extra-Long Life Plunge and Flush-Cut for Wood and Metal   FEATURES: TiN Coated Bimetal with 8% Cobalt teeth.   MATERIAL: Saw blade for wood and nails, plasterboard, plastic, sheet metal, copper and aluminium pipes and profiles.   APPLICATION: Flush cutting a nail in...

10mm Plunge and Flush-Cut for Wood and Metal   FEATURES: Bimetal with 8% Cobalt teeth.   MATERIAL: Saw blade for wood, chipboard, plastic, sheet metal, copper and aluminium pipes and profiles.   APPLICATION: Flush cutting a nail, adjustment work on non-ferrous profiles, plunge cutting...

FEATURES HCS hardened featuring Japanese toothing.   MATERIAL For all wood products up to 50mm, plasterboard and soft plastics.   APPLICATION Excellent cutting quality and speed, and outstanding precision. Medium width for a variety of applications.            

Very fast cuts, straight and coarse on thick construction timber, hard/softwoods from 5mm to 100mm (13/64"~4"), plywood, OSB.

Straight cuts on wood with nails/metal, chipboard and laminate (<60mm), sheet metal, aluminium profiles (3-18mm), glass fiber reinforced plastic/epoxy (<60mm).

For cutting various soft and non-abrasive materials.

Extra-clean splinter-free straight cuts on hard/softwood, plywood, OSB, laminates from 3mm to 65mm (1/8"~2-9/16").

Very fast cuts, straight and coarse, on hard/softwoods from 5mm to 60mm (7/32"~2-3/8"), plywood, OSB. Plunge cutting.

Very fast cuts, straight and coarse, on hard/softwoods from 5mm to 60mm (7/32"~2-3/8"), plywood, OSB. Plunge cutting.

Curve cut on softwood from 2mm to 15mm (5/64"~19/32"), plywood, OSB.

Straight cuts on thin sheet metals, ferrous and non-ferrous materials from 1mm to 3mm (3/64"~1/8").

Fine straight cuts on hard/softwoods, plywood, OSB and plastics from 3mm to 30mm (1/8"~1-1/4"). Plunge cutting.

Curved cuts, fine finishing on both sides of surface on hard/softwoods, plywood, chipboard, MDF, double sided laminates from 1,5mm to 15mm (1/16"~3/4").

For cutting thick sheet metal (4-12mm - 1/8"-1/2"), pipes & profiles (<100mm - 4"), plastics, glass fibre reinforced plastic/epoxy, fibre cement (<100mm - 4"), wood with nails or metal.   SAFETY WARNINGS: Before use, read all warnings in machine manual.  

For repairing pallets, for cutting wood with nails or metal with less than 100mm (4") in thickness, sheet metal, pipe, aluminium profiles from 3mm to 12mm (1/8" - 1/2") in thickness.

For cutting thick sheet metal from 3mm to 8mm (1/8" - 5/16") in thickness, solid pipe and profiles with less than 100mm (4") in diameter. Quick cut.

JS725VFR Special saw blade for pallet repairs. Cutting depth 150mm (6"). Optimized saw blade dimensions for low vibration.

Cuts porous concrete, red brick, fibre cement, plasterboard, glass fibre reinforced plastic/epoxy (<100mm), wood & nails, Eternit®, MDF.

For cutting wood with nails or metal, chipboard with less than 250mm (10") in thickness, glass fibre reinforced plastic/epoxy with less than 60mm (2-3/8") in thickness.

For cutting porous concrete, red brick, fibre cement (10-250mm), glass fibre reinforced plastic/epoxy (<100mm). Fast Cut.   SAFETY WARNINGS: Before use, read all warnings in machine manual.  

For fast cuts in special materials. Sharp, durable and lightweight very large tooth pitch and side-set teeth for quick cutting up to 250mm in thickness. Anticorrosion Stainless Steel construction. Ideai for sectioning and cutting meat, bone, frozen products and ice. SAFETY TIPS: Practice good...

For cutting porous concrete, red brick, fibre cement (10-175mm), glass fibre reinforced plastic/epoxy (<100mm). Fast Cut.   SAFETY WARNINGS: Before use, read all warnings in machine manual.

JS1122BF is a great sabre saw blade for cutting thick sheet metal from 3mm to 8mm (1/8" - 5/16") in thickness, solid pipe and profiles with less than 175mm (7") in diameter. Flexible flush cut, quick cut.

For cutting coarse, nail-free wood with less than 175mm (7") in thickness, firewood with less than 175mm (7") in diameter.

An indispensable tool for easy and safe end trimming after edge banding.   Position the tool on the banding, press down on the handle to operate the blade in a shearing action. The cutting knives are interchangeable, so when the cutting knife becomes dull,...

Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2”) and 25mm (1”), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the...

These blocks are great for holding your workpiece without any clamps. Their anti-slip surface grip both your bench top and the underside of your workpiece. Raise your work above the bench and benefit from plenty of clearance for your router bits, cutters, etc.

- Top zipped wide opening design for easy approaching tools. - Hard rubber bottom keeps bag sturdy, protects content from falls. - 6 interior pockets plus 12 exterior pockets. - Ideal for carrying hand tools and other small to medium items & accessories.

#N/A

EASY TO USE!   Install & Remove as a clamping nut. Health & Safety. Tool performance and cut quality. Tool life & Labor Costs. Recomended for Nesting and Routing operations. No waisted time during process. Replaces the standard clamping nut. Suitable for any collet...

CMT’s bull nose bits create elegantly finished edges on stair treads, window sills and shelves in one pass. Add a final touch by using a cutter with a bead diameter wider than the stock thickness.    Safety tips: to be used only on router...

Constructed with thick carbide tips and downward shear angle design, CMT mortising bits give you flawless performance. The negative shear angle of the cutting edges pushes the wood fibers down as they cut, allowing you to rout perfect hinge mortises with no splintered edges...

With the CMT T-slot bits you can make holes that keep your frames, plaques or any wall hanging perfectly straight and attached to the wall. These bits bore an entry hole in the wood, then proceed to cut holes and finished by boring a...

With the CMT T-slot bits you can make holes that keep your frames, plaques or any wall hanging perfectly straight and attached to the wall. These bits bore an entry hole in the wood, then proceed to cut holes and finished by boring a...

The ideal bit for engraving in wood, CMT designed this bit to make attractive signage without running the risk of splitting or chipping. Especially useful for letter carving in relief. A flattened bottom makes relief letter-making easy and accurate. This exclusive design allows you...