DeWalt

A 14-piece master kit with 11 bi-metal hole saws from 3/4" to 2-1/2", two arbors and pilot bits, in a durable case. Covers most electrical and plumbing hole sizes in wood, metal and plastic.

A 5-piece impact-rated hole saw set.

A folding steel stand for DeWalt D24000 and D36000 10" wet tile saws. It adjusts to four heights and folds flat for transport.

A telescoping dust extractor attachment with hose for SDS rotary hammers. An integrated depth stop and a compact design help in tight spaces. Includes a side handle.

A corded 1-1/8" SDS Plus combination hammer kit. The E-Clutch anti-rotation system stops the tool if the bit binds, and Shocks active vibration control reduces the vibration you feel. Includes a kit box and depth rod.

A corded 1-3/4" SDS Max combination rotary hammer kit with 10.5 joules of impact energy for drilling and chipping. The E-Clutch system stops the tool in bind-up situations. Includes a kit box.

A corded 1-7/8" SDS Max combination hammer with a brushless motor and E-Clutch anti-rotation. It is designed to keep speed under heavy loads and reduce vibration. Includes a kit box.

A corded 2" SDS Max rotary hammer with a brushless motor and E-Clutch anti-rotation. It reduces vibration for the user and comes in a TSTAK-compatible kit box.

A 12-lb SDS Max chipping hammer delivering 7.1 joules at 3,150 BPM for efficient chipping and breaking. A low-vibration side handle adds comfort over long jobs. Includes a carrying case.

A 16-lb SDS Max chipping hammer with 10.5 joules of impact energy. The Shocks active vibration control system reduces the vibration you feel, and a 360-degree bail handle improves control. Includes a kit box.

A 68 lb class 1-1/8" hex demolition hammer rated for 52 joules of impact energy, built for trenching, breaking out stairs and slabs, asphalt and hard-packed dirt. A 15-amp motor and all-metal housing are built for heavy-duty work.

A hammer truck that carries up to four pieces of 1-1/8" hex breaker steel on board. A heavy-duty steel gate secures the breaker on the truck. Supplied with chisels per DeWalt.

A heavy-duty heat gun with variable temperature control. Built-in overload protection shuts down the heating element if it overheats. Includes fishtail surface and cone nozzles.

A heavy-duty heat gun with an LCD display that lets you set temperature in 50-degree steps. Built-in overload protection shuts down the heating element if it overheats. Includes fishtail surface and cone nozzles.

A heat gun with an LCD readout that sets temperature in 50-degree steps, with overload protection and a built-in kickstand. The kit comes in a hard case with a cone nozzle, a fishtail surface nozzle and about ten other accessories.

A corded 7" and 9" angle grinder with a 5.3 HP (maximum) motor running at 6,000 RPM, with overload protection. Includes a 5-position side handle and guards for both wheel sizes.

A 14" abrasive chop saw with a 2,300-watt brushed motor and overload protection for cutting metal. The ergonomic handle is built for a comfortable grip. Includes a 14" abrasive wheel and wrench.

A 3-3/4" (95mm) bi-metal hole saw with a 4/5 variable-pitch tooth form for wood, metal and plastic. The deep cup cuts 2x lumber in one pass, and the long slot makes plug removal easy. Arbor not included.

A 3-7/8" (98mm) bi-metal hole saw for cutting wood, metal and plastic. The deep cup handles 2x material in a single pass, and the continuous slot gives leverage to remove the plug. Arbor sold separately.

A 4-1/8" (105mm) bi-metal hole saw for larger openings in wood, metal and plastic. Patented tooth form, deep cup for thick stock, and a long slot for easy plug ejection. Arbor sold separately.

A 4-1/4" (108mm) bi-metal hole saw with a high-speed-steel cutting edge for wood, metal and plastic. The deep cup cuts through 2x lumber, and the slot helps pop out the plug. Arbor sold separately.

A 4-1/2" (114mm) bi-metal hole saw for wood, metal and plastic. Its deeper cup cuts 2-by material in one pass, and the large continuous slot gives leverage for easy plug ejection. Arbor sold separately.

A 4-3/4" (121mm) bi-metal hole saw for large openings in wood, metal and plastic. A patented tooth form clears chips, and the continuous slot makes plug removal easier. Arbor sold separately.

A 5" (127mm) bi-metal hole saw for wood, metal and plastic. The deeper saw design cuts 2-by material in a single pass, and the large slot makes plug ejection simple. Arbor sold separately.

A 5-1/2" (140mm) bi-metal hole saw for big openings in wood, metal and plastic. Patented tooth form, deep cup and a long continuous slot for plug removal. Arbor sold separately.

A 4-3/8" bi-metal hole saw for wood, metal and plastic. Patented tooth form, a deep cup for thick material, and a continuous slot for easy plug ejection. Arbor sold separately.

A 4-5/8" (118mm) bi-metal hole saw for wood, metal and plastic. Deep cup for 2x stock, patented tooth form, and a continuous slot for plug removal. Arbor sold separately.

A 2-1/2" Elite Series hole saw with carbide-tipped teeth, built for heavy metal and tough cutting. Welded carbide tips hold their bond and last longer than standard teeth.

A 2-1/4" (57mm) Elite Series hole saw with carbide-tipped teeth for cutting heavy metal. Welded carbide tips are made to hold their bond.

A 2-1/8" (54mm) Elite Series hole saw with carbide-tipped teeth for cutting heavy metal. Welded carbide tips are made to hold their bond.

A 3" (76mm) Elite Series hole saw with carbide-tipped teeth for cutting heavy metal. Advanced welding technology strengthens the tip bond so the teeth keep their edge.

A 3-5/8" (92mm) Elite Series hole saw with carbide-tipped teeth for cutting heavy metal. Welded carbide tips are made to hold their bond.

A 4" (102mm) Elite Series hole saw with carbide-tipped teeth for tough metal cutting. The tip bond is built to hold up in heavy-duty use.

A 4-1/2" (114mm) Elite Series hole saw with a carbide-tipped cutting edge for continued cutting in heavy metal.

A 9-piece hole saw set with carbide-tipped teeth.

A 1-3/4" (44mm) multi-material hole saw with large carbide tips that resist wear when it hits nails or abrasive materials. Made to cut through a mix of materials in one pass.

A 1-3/8" (35mm) multi-material hole saw with carbide tips that stand up to nails and abrasive materials. Built for cutting through mixed materials.

A 2-1/4" (57mm) multi-material hole saw with large carbide tips that resist wear when cutting nails and abrasive materials.

A 2-1/8" (54mm) multi-material hole saw with carbide tips for cutting through mixed materials, including nail-embedded wood and abrasive stock.

A 2-3/4" (70mm) multi-material hole saw with large carbide tips that hold up against nails and abrasive materials.

A 3" (76mm) multi-material hole saw. Large carbide tips resist wear when it meets nails or abrasive materials.

A 3-5/8" (92mm) multi-material hole saw with carbide tips made for cutting through mixed materials and nails.

A 4" (102mm) multi-material hole saw with large carbide tips that resist wear when cutting abrasive materials or hitting nails.

A 4-1/4" (108mm) multi-material hole saw with carbide tips that hold up when it hits nails or abrasive stock.

A 4-5/8" (117mm) multi-material hole saw with large carbide tips that stand up to nails and abrasive materials.

A 6-1/4" (159mm) multi-material hole saw for large openings. Large carbide tips resist wear when cutting nails or abrasive materials.

A 7-piece multi-material hole saw set with carbide teeth.

A quick-change arbor with a 1/2" shank for carbide hole saws from 1-1/4" to 6-1/4" (32 to 159mm). The Rapid Load design lets you swap saws and pilot bits without tools.

A tool-free quick-change arbor with a 1/2" shank for hole saws from 1-1/4" to 6". Remove the saw, then the pilot bit, and reload without a wrench.

A tool-free quick-change arbor with a 3/8" shank for hole saws from 9/16" to 1-3/16". Swap saws and pilot bits without a wrench.