This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material...

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Diablo's next generation Saw Blades for Thin Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts...

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness...

Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Flawless crosscuts...

Studs & Tubing (Wall thickness 1/16" (16 gauge) min 1/4" max); Plates & Bars (Thickness 1/8" (11 gauge) min 1/2" max); RODS (Diameter 1/4" min 1-1/2" max) - Studs/Channels, Angle Iron, Plates/Bars, Pipes/Tubes, EMT Conduit, Threaded Rod Diablo’s Steel Demon™ Cermet II saw blades...

Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. Depth of cut (1/4" min to 1-5/8" max) Freud’s range of dedicated saw blades for picture frames and molding saw blades deliver superior finishes in solid wood...

Fine Finish Blades For Sliding Miter & Radial Arm Saws. Depth of cut (1/2" min to 2-3/4" max) This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being...

Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2"). This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots,...

Smooth, Fast Heavy-Duty Ripping. Depth of cut (3/4" to 2-3/4"). This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are...

Solid surface materials such as Dupont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. Depth of cut (1/4" to 1-5/8"). With this ultimate solid surface blade, there is no need for stabilizers. This blade features teeth with a specially designed triple chip grind for leaving swirl-free...

Diablo's next generation Saw Blades for Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and...

High quality crosscuts and rip cuts in wood, plywood & melamine Diablo's Fine Finish Saw Blade for Wood allows trim crews to get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting...

Studs & Tubing (Wall thickness 1/8" (11 gauge) min 1/2" max); Plates & Bars (Thickness 1/4" (11 gauge) min 1" max); RODS (Diameter 1/2" min 2" max) - Studs/Channels, Angle Iron, Plates/Bars, Pipes/Tubes, EMT Conduit, Threaded Rod Diablo’s Steel Demon™ Cermet II saw blades...

This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but...

Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. Depth of cut (1/4" min to 1-5/8" max) Freud’s range of dedicated saw blades for picture frames and molding saw blades deliver superior finishes in solid wood...

10" x 50T Thin Kerf Combination Blade Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2"). The ultimate combination blade is now available in a thin kerf design for less amp draw and reduced material waste. This ultimate combination blade combines one flat tooth...

For thin stock non-ferrous and plastics on miter or RAS. The Alumi-Cut Series offers true quality and affordability. These blades are available in a wide variety of sizes to fi t most popular job site and shop saws. Excellent results in aluminum, copper,brass, bronze...

The Mel-Pro series is a complete line of blades that solve problems associated with cutting melamine and other laminated wood products. Additionally, veneer-faced plywood can be cut without splintering at more reasonable feed speeds than in the past. Numerous requests for a better melamine...

Diablo's next generation Aluminum saw blades are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last...