General Purpose/Combination

Carbide Tipped Blade to cut solid wood - Thin kerf for ripping and crosscutting. Features reduced cutting height for faster feed rate.

Carbide Tipped Blade to Cut Solid Wood. Straight tooth, rounded on the side, with positive cutting angle. Ripping and crosscutting with fine cutting finish and without scratching, in order to achieve a perfectly smoothed surface.

Carbide Tipped Blade to Cut Solid Wood. Straight tooth, rounded on the side, with positive cutting angle. Ripping and crosscutting with fine cutting finish and without scratching, in order to achieve a perfectly smoothed surface.

Carbide Tipped Blade to Cut Solid Wood. Straight tooth, rounded on the side, with positive cutting angle. Ripping and crosscutting with fine cutting finish and without scratching, in order to achieve a perfectly smoothed surface.

Carbide Tipped Blade for carpentry works. Suitable for ripping and crosscutting. High-performance sawblade with excellent cut and without splintering; finished and perfectly smooth surface, which is specifically recommended for molds and sections end trims whose front-end cut keeps visible.

Carbide Tipped Blade for carpentry works. Suitable for ripping and crosscutting. High-performance sawblade with excellent cut and without splintering; finished and perfectly smooth surface, which is specifically recommended for molds and sections end trims whose front-end cut keeps visible.

Carbide Tipped Blade for carpentry works. Suitable for ripping and crosscutting. High-performance sawblade with excellent cut and without splintering; finished and perfectly smooth surface, which is specifically recommended for molds and sections end trims whose front-end cut keeps visible.

Carbide Tipped Blade for carpentry works. Suitable for ripping and crosscutting. High-performance sawblade with excellent cut and without splintering; finished and perfectly smooth surface, which is specifically recommended for molds and sections end trims whose front-end cut keeps visible.

Diablo's General Purpose Saw Blades for Wood are ideal for cutting oak, pine, plywood, pressure treated lumber, wood composites, and beams. Ideal for timber framing such as laminated veneer lumber, glued timber (glulams),and Paralams.

Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by...

Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by...

Diablo's general purpose saw blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks....

Diablo's General Purpose Beam Saw Blade for Wood is specifically designed for use on a wormdrive saw (5/8" diamond knockout). Cuts 4X headers and fence posts, 2X sandwiched headers, exposed beams for decks and porches and 7 sheets of 1/2" plywood with one pass.

Diablo's Wood Demon™ Ultimate General Purpose saw blade sets a new standard for quality cuts in general purpose applications with up to 10X more productivity in trim work, cabinets, sheet goods and more. This technology rich blade includes the ultimate trifecta for creating superior...

Diablo's general purpose saw blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks....

Diablo's General Purpose Saw Blades for Wood are ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still...

10" x 40T Thin Kerf Next Generation Premier Fusion General Purpose Blade for Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine. Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the...

10" x 50T Thin Kerf Combination Blade Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2"). The ultimate combination blade is now available in a thin kerf design for less amp draw and reduced material waste. This ultimate combination blade combines one flat tooth...

This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but...

Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2"). This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots,...

This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades....

Application: for fast rip and crosscuts.   Machines: radial arm saws, miter saws, table saws.   Material: soft/hard wood and plywood.  

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table saws.   Material: soft/hard wood, plywood.

Application: for fast rip and crosscuts.   Machines: radial arm saws, miter saws, table saws.   Material: soft/hard wood and plywood.  

Application: for fast rip and crosscuts.   Machines: radial arm saws, miter saws, table saws.   Material: soft/hard wood and plywood.  

Application: for fine finish crosscuts. Glass-smooth finish on your miter cuts.   Machines: compound miter saws.   Material: soft and hardwood, plywood, double-sided laminates.

Application: for accurate rip and crosscuts.   Machines: portable benchtop and table saws.   Material: soft and hardwood.  

Application: for accurate rip and crosscuts.   Machines: portable benchtop and table saws.   Material: soft and hardwood.  

Application: for accurate rip and crosscuts.   Machines: portable benchtop and table saws.   Material: soft and hardwood.  

CMT Circular Saw Blades CMT 291.160.24H Gen. Purpose for Festool 160 x 24 20mm Bore Saw Blade Application: for rip and crosscuts. Machines: table and miter saws, portable machines. Material: soft and hardwood, plywood. Diameter 160Bore diameter 20Pin hole 2/6/32Number of cutting edges 24Kerf thickness 2,5Plate thickness...

This saw blade is part of the CMT Industrial Orange Chrome/Xtreme premium line of blades. This is one of CMTs highest performing saw blades and designed for professional woodworkers who require high precision and durability. The special chrome carbide reduces tooth abrasion and the...

This saw blade is part of the CMT Industrial Orange Chrome/Xtreme premium line of blades. This is one of CMTs highest performing saw blades and designed for professional woodworkers who require high precision and durability. The special chrome carbide reduces tooth abrasion and the...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

  CHROME PLATED BLADE Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power by the motor is significantly reduced so the tool moves smoothly throughout cutting operation. Tool maintenance is fast and easy. Surface hardness: 380-400 Vickers.     TRI-METAL BRAZING...

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

Application: for rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.   Machines: radial arm saws, miter saws, circular saws, table and special saws.   Material: soft/hard wood, plywood and chipboard.              

Application: for rip and crosscuts with exceptional finish.   Machines: radial arm saws, miter saws, table and special saws.   Material: excellent in soft and hard wood, good in plywood.   Saw blade 214.040.10 features a thin kerf.          

Application: for rip and crosscuts with exceptional finish.   Machines: radial arm saws, miter saws, table and special saws.   Material: excellent in soft and hard wood, good in plywood.   Saw blade 214.040.10 features a thin kerf.