DeWalt Concrete Drilling

A 1/8" high-speed-steel Pilot Point cut-out bit for fast, accurate cuts in drywall.

A 7/8" extra-long SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 39" with a 47" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 5/8" extra-long SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 39" with a 47" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 3/4" extra-long SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 39" with a 47" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 1-1/8" extra-long SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 39" with a 47" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 1" extra-long SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 39" with a 47" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 1-3/8" SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 1-1/8" standard-length SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 15-3/4" with a 23" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 11/16" SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 1-1/4" SDS Max deep embedment hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 1-1/2" SDS Max deep embedment hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 7/8" standard-length SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 15-3/4" with a 23" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 5/8" standard-length SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 15-3/4" with a 23" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 3/4" standard-length SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 15-3/4" with a 23" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 1" standard-length SDS Max hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. Working length is 15-3/4" with a 23" overall length. The dust shroud connection supports OSHA Table 1 dust control.

A 5/8" SDS Plus 2-cutter stop drill bit for setting drop-in anchors in concrete and masonry. The built-in stop sets the anchor depth.

A 1/2" SDS Plus 2-cutter stop drill bit for setting drop-in anchors in concrete and masonry. The built-in stop sets the anchor depth.

A 9/16" SDS Plus hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 3/8" SDS Plus 2-cutter stop drill bit for setting drop-in anchors in concrete and masonry. The built-in stop sets the anchor depth.

A 5/8" x 16" x 18" SDS Plus bit for drilling through rebar embedded in concrete. The tip geometry is optimized to cut rebar.

A 3/4" x 16" x 18" SDS Plus bit for drilling through rebar embedded in concrete. The optimized carbide tip is made to cut rebar, and the head is built for hammer-mode drilling.

A 1/2" x 16" x 18" SDS Plus bit for drilling through rebar embedded in concrete. The tip geometry is optimized to cut rebar.

A 5/8" SDS Plus hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 3/8" SDS Plus hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 3/4" SDS Plus hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 1/2" SDS Plus hollow drill bit that pulls dust through the bit into a dust extractor while you drill concrete and masonry. The dust shroud connection supports OSHA Table 1 dust control.

A 1" x 16" x 18" SDS Plus bit for drilling through rebar embedded in concrete. The carbide tip geometry is designed to cut rebar easily, and the head is built for hammer-mode drilling.

A replacement centering pin (center bit) for DeWalt SDS Max one-piece core bits, so you can keep drilling without replacing the whole core bit.

A 6" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 5" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 4" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 4" x 12" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 3-1/2" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 3-1/2" x 12" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 3-1/4" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 3-1/4" x 12" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 2-3/4" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 2-3/4" x 12" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting, and a tool-free centering bit makes removal easier.

A 1-3/4" x 22" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting.

A 1-3/4" x 12" one-piece SDS Max core bit for drilling large holes in concrete with an SDS Max rotary hammer. The alternating tooth design is made for durability and quick cutting.

A 16" SDS Max shank adapter for DeWalt two-piece core bits. Pair it with a carbide-tipped core bit body to change diameters without replacing the whole bit.

A 7" SDS Max shank for DeWalt two-piece core bits. Pair it with a carbide-tipped core bit body to change diameters without replacing the whole bit.

A 16" spline-shank adapter for DeWalt two-piece core bits, for spline-drive rotary hammers. Pair it with a carbide-tipped core bit body to change diameters without replacing the whole bit.

A 5" x 4" carbide-tipped core bit body in a two-piece design, so you can change diameters without replacing the whole bit.

A 4" x 4" carbide-tipped core bit body in a two-piece design, so you can change diameters without replacing the whole bit.

A 3-1/2" x 4" carbide-tipped core bit body in a two-piece design for easy diameter changes. The replaceable center bit extends tool life.

A 3" x 4" carbide-tipped core bit body in a two-piece design, so you can change diameters without replacing the whole bit.

A 2-1/2" x 4" carbide-tipped core bit body in a two-piece design, so you can change diameters without replacing the whole bit. The center bit is replaceable for longer tool life.

A 2" x 4" carbide-tipped core bit body in a two-piece design, so you can change diameters without replacing the whole bit.

A 1-1/2" x 4" carbide-tipped core bit body in a two-piece design, so you can change diameters without replacing the whole bit.