CMT - IWF PROMO

Sidebar
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • CMT 663.101.11 V-GROOVE & FOLDING CNC BIT D=2-3/64’’ (91°) S=20mm
    Prime
    CMT 663.101.11 V-GROOVE & FOLDING CNC BIT D=2-3/64’’ (91°) S=20mm
    TECHNICAL DETAILS: Super-strength steel. 1 cutting edge (Z1). 2 cutting edges (Z2). 790.360.01 - Optional S790.360.03: 36x12x1,5mm HW-SMG replaceable knife (4 cutting edges 35°).
    $127.80
    $213.00
    $127.80
  • CMT 663.005.11 SPOILBOARD SURFACING ROUTER CUTTERS WITH INSERT KNIVES D=1-1/2’’
    Prime
    CMT 663.005.11 SPOILBOARD SURFACING ROUTER CUTTERS WITH INSERT KNIVES D=1-1/2’’
    TECHNICAL FEATURES: Super strength steel. 3 cutting edges (Z3). 4 cutting edges (Z4).  
    $66.50
    $110.80
    $66.50
  • CMT 660.351.11 RABBETING BITS WITH INSERT KNIVES D=1-3/8”x15/32” (H=1/2”) S=1/4”
    Prime
    CMT 660.351.11 RABBETING BITS WITH INSERT KNIVES D=1-3/8”x15/32” (H=1/2”) S=1/4”
    Rabbeting bits with two replaceable knives fixed by special Torx screws. The knives are sharpened on all 4 sides and increase efficiency when working with board materials.   Rabbeting bits are equipped with ball bearing guides for rabbeting width H= 12,7mm.   For chipboards, hardwood or...
    $71.30
    $109.70
    $71.30
  • CMT 552-WAX COOLING & LUBRICATING WAX 30ml (1 fl. Oz)CMT 552-WAX COOLING & LUBRICATING WAX 30ml (1 fl. Oz)
    Prime
    CMT 552-WAX COOLING & LUBRICATING WAX 30ml (1 fl. Oz)
    Accessories for 552 hole saws by CMT Orange Tools 552-GUIDE Drill Guide with Suction Cups - 7 holes  Ø4 - 5 - 6 - 7 - 8 - 10 - 12mm Ø5/32” - 3/16” - 1/4 “- 9/32” - 5/16” - 3/8” - 1/2”...
    $7.70
    $11.90
    $7.70
  • CMT 552-008 DIAMOND DRY HOLE SAW Ø5/16” (8mm) S=HEXCMT 552-008 DIAMOND DRY HOLE SAW Ø5/16” (8mm) S=HEX
    Prime
    CMT 552-008 DIAMOND DRY HOLE SAW Ø5/16” (8mm) S=HEX
    552 DIAMOND HOLE SAWS, for drill RPM 2200~4000, recommended minimum speed 14V. Available with hexagonal and M14 connection.   Ideal for drilling materials such as: Hard tiles (ceramics, stoneware, ...) Hard stones (granite, marble, ...) Artificial stones (OKITE®, SILESTONE®, ...)   Also available the...
    $14.90
    $22.90
    $14.90
  • CMT 552-001-05 DIAMOND DRY HOLE SAW SET Ø3/16” - 1/4” - 5/16” - 3/8” - 1/2” (5-PC)CMT 552-001-05 DIAMOND DRY HOLE SAW SET Ø3/16” - 1/4” - 5/16” - 3/8” - 1/2” (5-PC)
    Prime
    CMT 552-001-05 DIAMOND DRY HOLE SAW SET Ø3/16” - 1/4” - 5/16” - 3/8” - 1/2” (5-PC)
    552 DIAMOND HOLE SAWS, for drill RPM 2200~4000, recommended minimum speed 14V. Available with hexagonal and M14 connection.   Ideal for drilling materials such as: Hard tiles (ceramics, stoneware, ...) Hard stones (granite, marble, ...) Artificial stones (OKITE®, SILESTONE®, ...)   Also available the...
    $57.90
    $89.00
    $57.90
  • CMT 551-060X BI-METAL PLUS BIM8%CO HOLE SAW D=2-3/8” (60mm)CMT 551-060X BI-METAL PLUS BIM8%CO HOLE SAW D=2-3/8” (60mm)
    Prime
    CMT 551-060X BI-METAL PLUS BIM8%CO HOLE SAW D=2-3/8” (60mm)
    New 551X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.    
    $14.70
    $22.60
    $14.70
  • CMT 551-016X BI-METAL PLUS BIM8%CO HOLE SAW D=5/8” (16mm)CMT 551-016X BI-METAL PLUS BIM8%CO HOLE SAW D=5/8” (16mm)
    Prime
    CMT 551-016X BI-METAL PLUS BIM8%CO HOLE SAW D=5/8” (16mm)
    New 551X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.    
    $7.20
    $11.00
    $7.20
  • CMT 550-PD02 PILOT DRILL FOR PUSH&LOCK ARBOR Ø1/4”x4-15/16” (6.35x125mm)CMT 550-PD02 PILOT DRILL FOR PUSH&LOCK ARBOR Ø1/4”x4-15/16” (6.35x125mm)
    Prime
    CMT 550-PD02 PILOT DRILL FOR PUSH&LOCK ARBOR Ø1/4”x4-15/16” (6.35x125mm)
    550-PH85 - PUSH&LOCK arbor Hex8.5 (11/32'') 550-PH11 - PUSH&LOCK arbor Hex11 (7/16'')   550-PD01 - Centering drill in HW, Ø7mm (17/64'') Bricks, Concrete Soft tiles   550-PD02 - Center drill in HSS, Ø6,35mm (1/4'') Wood MDF, laminate Plastic Steel, Stainless Steel, Aluminium, Copper, Brass...
    $6.30
    $9.70
    $6.30
  • CMT 550-PD01 PILOT DRILL FOR PUSH&LOCK ARBOR Ø17/64”x4-15/16” (7x125mm)CMT 550-PD01 PILOT DRILL FOR PUSH&LOCK ARBOR Ø17/64”x4-15/16” (7x125mm)
    Prime
    CMT 550-PD01 PILOT DRILL FOR PUSH&LOCK ARBOR Ø17/64”x4-15/16” (7x125mm)
    550-PH85 - PUSH&LOCK arbor Hex8.5 (11/32'') 550-PH11 - PUSH&LOCK arbor Hex11 (7/16'')   550-PD01 - Centering drill in HW, Ø7mm (17/64'') Bricks, Concrete Soft tiles   550-PD02 - Center drill in HSS, Ø6,35mm (1/4'') Wood MDF, laminate Plastic Steel, Stainless Steel, Aluminium, Copper, Brass...
    $5.90
    $9.00
    $5.90
  • CMT 550-185X MULTI-PURPOSE TCT HOLE SAW D=7-5/16” (185mm)CMT 550-185X MULTI-PURPOSE TCT HOLE SAW D=7-5/16” (185mm)
    Prime
    CMT 550-185X MULTI-PURPOSE TCT HOLE SAW D=7-5/16” (185mm)
    New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.
    $87.00
    $133.80
    $87.00
  • CMT 550-152X MULTI-PURPOSE TCT HOLE SAW D=6” (152mm)CMT 550-152X MULTI-PURPOSE TCT HOLE SAW D=6” (152mm)
    Prime
    CMT 550-152X MULTI-PURPOSE TCT HOLE SAW D=6” (152mm)
    New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.
    $43.30
    $66.60
    $43.30
  • CMT 550-127X MULTI-PURPOSE TCT HOLE SAW D=5” (127mm)CMT 550-127X MULTI-PURPOSE TCT HOLE SAW D=5” (127mm)
    Prime
    CMT 550-127X MULTI-PURPOSE TCT HOLE SAW D=5” (127mm)
    New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.
    $36.00
    $55.40
    $36.00
  • CMT 550-079X MULTI-PURPOSE TCT HOLE SAW D=3-1/8’’ (79mm)CMT 550-079X MULTI-PURPOSE TCT HOLE SAW D=3-1/8’’ (79mm)
    Prime
    CMT 550-079X MULTI-PURPOSE TCT HOLE SAW D=3-1/8’’ (79mm)
    New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.
    $20.50
    $31.60
    $20.50
  • CMT 550-065X MULTI-PURPOSE TCT HOLE SAW D=2-9/16’’ (65mm)CMT 550-065X MULTI-PURPOSE TCT HOLE SAW D=2-9/16’’ (65mm)
    Prime
    CMT 550-065X MULTI-PURPOSE TCT HOLE SAW D=2-9/16’’ (65mm)
    New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.
    $18.10
    $27.80
    $18.10
  • CMT 550-032X MULTI-PURPOSE TCT HOLE SAW D=1-1/4’’ (32mm)CMT 550-032X MULTI-PURPOSE TCT HOLE SAW D=1-1/4’’ (32mm)
    Prime
    CMT 550-032X MULTI-PURPOSE TCT HOLE SAW D=1-1/4’’ (32mm)
    New 550X hole saw series  The new 550X e 551X series equipped with the new XTREME FAST and PUSH&LOCK systems were designed to ensure maximum lifetime and provide outstanding cutting performance on all materials.
    $12.00
    $18.40
    $12.00
  • CMT 541.526.00 SPACER D=12/18x0.1mmCMT 541.526.00 SPACER D=12/18x0.1mm
    Prime
    CMT 541.526.00 SPACER D=12/18x0.1mm
    $1.90
    $2.90
    $1.90
  • CMT 541.525.00 SPACER D=12/21x0.5mmCMT 541.525.00 SPACER D=12/21x0.5mm
    Prime
    CMT 541.525.00 SPACER D=12/21x0.5mm
    $2.00
    $3.00
    $2.00
  • CMT 541.520.00 SPACER D=12/21x0.3mmCMT 541.520.00 SPACER D=12/21x0.3mm
    Prime
    CMT 541.520.00 SPACER D=12/21x0.3mm
    $2.20
    $3.30
    $2.20
  • CMT 541.002.00 STOP COLLAR B=1/2’’CMT 541.002.00 STOP COLLAR B=1/2’’
    Prime
    CMT 541.002.00 STOP COLLAR B=1/2’’
    $6.30
    $9.40
    $6.30
  • CMT 537.993.31 FORSTNER BIT 4-1/2” S=3/8” RHCMT 537.993.31 FORSTNER BIT 4-1/2” S=3/8” RH
    Prime
    CMT 537.993.31 FORSTNER BIT 4-1/2” S=3/8” RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $60.30
    $92.80
    $60.30
  • CMT 537.400.31 FORSTNER BIT 40mm S=10mm RHCMT 537.400.31 FORSTNER BIT 40mm S=10mm RH
    Prime
    CMT 537.400.31 FORSTNER BIT 40mm S=10mm RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $16.60
    $25.50
    $16.60
  • CMT 537.250.31 FORSTNER BIT 25mm S=8mm RHCMT 537.250.31 FORSTNER BIT 25mm S=8mm RH
    Prime
    CMT 537.250.31 FORSTNER BIT 25mm S=8mm RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $10.30
    $15.80
    $10.30
  • CMT 537.222.31 FORSTNER BIT 7/8’’ S=3/8” RHCMT 537.222.31 FORSTNER BIT 7/8’’ S=3/8” RH
    Prime
    CMT 537.222.31 FORSTNER BIT 7/8’’ S=3/8” RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $9.00
    $13.90
    $9.00
  • CMT 537.200.31 FORSTNER BIT 20mm S=8mm RHCMT 537.200.31 FORSTNER BIT 20mm S=8mm RH
    Prime
    CMT 537.200.31 FORSTNER BIT 20mm S=8mm RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $9.10
    $14.00
    $9.10
  • CMT 537.160.31 FORSTNER BIT 16mm S=8mm RHCMT 537.160.31 FORSTNER BIT 16mm S=8mm RH
    Prime
    CMT 537.160.31 FORSTNER BIT 16mm S=8mm RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $8.50
    $13.10
    $8.50
  • CMT 537.140.31 FORSTNER BIT 14mm S=8mm RHCMT 537.140.31 FORSTNER BIT 14mm S=8mm RH
    Prime
    CMT 537.140.31 FORSTNER BIT 14mm S=8mm RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $8.10
    $12.40
    $8.10
  • CMT 537.127.31 FORSTNER BIT 1/2’’ S=3/8” RHCMT 537.127.31 FORSTNER BIT 1/2’’ S=3/8” RH
    Prime
    CMT 537.127.31 FORSTNER BIT 1/2’’ S=3/8” RH
    Standard Rim and Toothed Rim: Standard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25mm) are designed with toothed rims.   Technical details: Long-lasting cutting performance Super strength SP steel Precision balanced centre point 2 ground spurs [V2]...
    $7.20
    $11.00
    $7.20
  • CMT 537.000.12 FORSTNER BIT SET S=8-10mm 12-PCS RH
    Prime
    CMT 537.000.12 FORSTNER BIT SET S=8-10mm 12-PCS RH
    We offer a wide range of Forstner bits in the most popular diameters.   The high performance stagger tooth design on the bits with larger diameters allows for sharp holes with straight sides and flat bottoms. Bits available for drill presses, electric and cordless...
    $96.10
    $147.90
    $96.10
  • CMT 529.508.31 PLUG CUTTER 2’’ S=5/8” RHCMT 529.508.31 PLUG CUTTER 2’’ S=5/8” RH
    Prime
    CMT 529.508.31 PLUG CUTTER 2’’ S=5/8” RH
    TECHNICAL DETAILS: SP steel. Long lasting cutter performance. Use our D=16mm bushing to increase the 13mm shank (order no. 799.130.00).   D mm D inches Max RPM Softwood Max RPM Hardwood <Ø16 <Ø5/8 1000 500 <Ø40 <Ø1-37/64 500 300 >Ø40 >Ø1-37/64 200 150  
    $82.40
    $126.80
    $82.40
  • CMT 529.413.31 PLUG CUTTER 1-5/8’’ S=5/8” RHCMT 529.413.31 PLUG CUTTER 1-5/8’’ S=5/8” RH
    Prime
    CMT 529.413.31 PLUG CUTTER 1-5/8’’ S=5/8” RH
    TECHNICAL DETAILS: SP steel. Long lasting cutter performance. Use our D=16mm bushing to increase the 13mm shank (order no. 799.130.00).   D mm D inches Max RPM Softwood Max RPM Hardwood <Ø16 <Ø5/8 1000 500 <Ø40 <Ø1-37/64 500 300 >Ø40 >Ø1-37/64 200 150  
    $62.70
    $96.50
    $62.70
  • CMT 529.222.31 PLUG CUTTER 7/8’’ S=1/2” RHCMT 529.222.31 PLUG CUTTER 7/8’’ S=1/2” RH
    Prime
    CMT 529.222.31 PLUG CUTTER 7/8’’ S=1/2” RH
    TECHNICAL DETAILS: SP steel. Long lasting cutter performance. Use our D=16mm bushing to increase the 13mm shank (order no. 799.130.00).   D mm D inches Max RPM Softwood Max RPM Hardwood <Ø16 <Ø5/8 1000 500 <Ø40 <Ø1-37/64 500 300 >Ø40 >Ø1-37/64 200 150  
    $39.20
    $60.30
    $39.20
  • CMT 392.351.11 BORING BIT WITH PARALLEL SHANK 35mm S=1/2” RHCMT 392.351.11 BORING BIT WITH PARALLEL SHANK 35mm S=1/2” RH
    Prime
    CMT 392.351.11 BORING BIT WITH PARALLEL SHANK 35mm S=1/2” RH
    Technical details: Super strength steel HW precision balanced centre point 2 HW precision ground cutting edges [Z2] 2 HW negatively ground spurs [V2].
    $26.40
    $40.55
    $26.40
  • CMT 392.250.11 BORING BIT WITH PARALLEL SHANK 25mm S=5/16” RHCMT 392.250.11 BORING BIT WITH PARALLEL SHANK 25mm S=5/16” RH
    Prime
    CMT 392.250.11 BORING BIT WITH PARALLEL SHANK 25mm S=5/16” RH
    Technical details: Super strength steel HW precision balanced centre point 2 HW precision ground cutting edges [Z2] 2 HW negatively ground spurs [V2].
    $23.70
    $36.40
    $23.70
  • CMT 392.200.11 BORING BIT WITH PARALLEL SHANK 20mm S=5/16” RHCMT 392.200.11 BORING BIT WITH PARALLEL SHANK 20mm S=5/16” RH
    Prime
    CMT 392.200.11 BORING BIT WITH PARALLEL SHANK 20mm S=5/16” RH
    Technical details: Super strength steel HW precision balanced centre point 2 HW precision ground cutting edges [Z2] 2 HW negatively ground spurs [V2].
    $21.20
    $32.65
    $21.20
  • CMT 380.101.11 ROUTER BIT FOR DOMINO® XL JOINING 10mm RHCMT 380.101.11 ROUTER BIT FOR DOMINO® XL JOINING 10mm RH
    Prime
    CMT 380.101.11 ROUTER BIT FOR DOMINO® XL JOINING 10mm RH
    TECHNICAL DETAILS: • Premium quality super-strength steel. • Spiral portion coating with black P.T.F.E. • Extra-fine micrograin carbide spiral portion. • 2 cutting edges (Z2). • 2 spiral flutes.
    $26.80
    $41.20
    $26.80
  • CMT 380.080.11 ROUTER BIT FOR DOMINO® JOINING 8mm RH
    Prime
    CMT 380.080.11 ROUTER BIT FOR DOMINO® JOINING 8mm RH
    TECHNICAL DETAILS: • Premium quality super-strength steel. • Spiral portion coating with black P.T.F.E. • Extra-fine micrograin carbide spiral portion. • 2 cutting edges (Z2). • 2 spiral flutes.
    $23.00
    $35.40
    $23.00
  • CMT 380.040.11 ROUTER BIT FOR DOMINO® JOINING 4mm RH
    Prime
    CMT 380.040.11 ROUTER BIT FOR DOMINO® JOINING 4mm RH
    TECHNICAL DETAILS: • Premium quality super-strength steel. • Spiral portion coating with black P.T.F.E. • Extra-fine micrograin carbide spiral portion. • 2 cutting edges (Z2). • 2 spiral flutes.
    $24.10
    $37.10
    $24.10
  • CMT 376.100.11 DOWEL DRILL WITH COUNTERSINK 10x12x57mm S=10x28mm RHCMT 376.100.11 DOWEL DRILL WITH COUNTERSINK 10x12x57mm S=10x28mm RH
    Prime
    CMT 376.100.11 DOWEL DRILL WITH COUNTERSINK 10x12x57mm S=10x28mm RH
    TECHNICAL DETAILS: • Super-strength steel. • Spiral portion coated with orange or black P.T.F.E. • HW head with precision balanced centre point. • 2 precision ground cutting edges (Z2). • 2 ground spurs (V2). • 2 spiral flutes. • Parallel shank with driving flat...
    $26.70
    $48.50
    $26.70
  • CMT 376.082.11 DOWEL DRILL WITH COUNTERSINK 5/16”x20x57mm S=10x20mm RHCMT 376.082.11 DOWEL DRILL WITH COUNTERSINK 5/16”x20x57mm S=10x20mm RH
    Prime
    CMT 376.082.11 DOWEL DRILL WITH COUNTERSINK 5/16”x20x57mm S=10x20mm RH
    TECHNICAL DETAILS: • Super-strength steel. • Spiral portion coated with orange or black P.T.F.E. • HW head with precision balanced centre point. • 2 precision ground cutting edges (Z2). • 2 ground spurs (V2). • 2 spiral flutes. • Parallel shank with driving flat...
    $24.00
    $43.70
    $24.00
  • CMT 376.081.12 DOWEL DRILL WITH COUNTERSINK 5/16”x15x57mm S=10x25mm LHCMT 376.081.12 DOWEL DRILL WITH COUNTERSINK 5/16”x15x57mm S=10x25mm LH
    Prime
    CMT 376.081.12 DOWEL DRILL WITH COUNTERSINK 5/16”x15x57mm S=10x25mm LH
    TECHNICAL DETAILS: • Super-strength steel. • Spiral portion coated with orange or black P.T.F.E. • HW head with precision balanced centre point. • 2 precision ground cutting edges (Z2). • 2 ground spurs (V2). • 2 spiral flutes. • Parallel shank with driving flat...
    $24.00
    $43.70
    $24.00
  • CMT 373.100.11 DOWEL DRILL 10x50x85mm RH
    Prime
    CMT 373.100.11 DOWEL DRILL 10x50x85mm RH
    TECHNICAL DETAILS: • Super-strength steel. • Cutter portion coated with black or orange P.T.F.E. • HW head with precision balanced centre point. • 2 HW precision ground cutting edges (Z2). • 2 negatively ground spurs (V2). • 4 spiral flutes. • Parallel shank with...
    $16.80
    $30.50
    $16.80
  • CMT 373.050.11 DOWEL DRILL 5x50x85mm RHCMT 373.050.11 DOWEL DRILL 5x50x85mm RH
    Prime
    CMT 373.050.11 DOWEL DRILL 5x50x85mm RH
    TECHNICAL DETAILS: • Super-strength steel. • Cutter portion coated with black or orange P.T.F.E. • HW head with precision balanced centre point. • 2 HW precision ground cutting edges (Z2). • 2 negatively ground spurs (V2). • 4 spiral flutes. • Parallel shank with...
    $16.80
    $30.50
    $16.80
  • CMT 369.350.12 HINGE BORING BIT 35x70mm LHCMT 369.350.12 HINGE BORING BIT 35x70mm LH
    Prime
    CMT 369.350.12 HINGE BORING BIT 35x70mm LH
    TECHNICAL DETAILS: • Super-strength steel. • ???????Cutter portion coated with orange or black P.T.F.E. • ???????HW head with precision balanced centre point. • ???????2 HW precision ground cutting edges (Z2). • ???????2 negatively ground spurs (V2). • ???????Parallel shank with driving flat and length...
    $30.00
    $54.60
    $30.00
  • CMT 369.300.12 HINGE BORING BIT 30x70mm LHCMT 369.300.12 HINGE BORING BIT 30x70mm LH
    Prime
    CMT 369.300.12 HINGE BORING BIT 30x70mm LH
    TECHNICAL DETAILS: • Super-strength steel. • ???????Cutter portion coated with orange or black P.T.F.E. • ???????HW head with precision balanced centre point. • ???????2 HW precision ground cutting edges (Z2). • ???????2 negatively ground spurs (V2). • ???????Parallel shank with driving flat and length...
    $33.30
    $60.50
    $33.30
  • CMT 369.200.12 HINGE BORING BIT 20x70mm LHCMT 369.200.12 HINGE BORING BIT 20x70mm LH
    Prime
    CMT 369.200.12 HINGE BORING BIT 20x70mm LH
    TECHNICAL DETAILS: • Super-strength steel. • ???????Cutter portion coated with orange or black P.T.F.E. • ???????HW head with precision balanced centre point. • ???????2 HW precision ground cutting edges (Z2). • ???????2 negatively ground spurs (V2). • ???????Parallel shank with driving flat and length...
    $26.50
    $48.20
    $26.50
  • CMT 364.020.00 ADAPTER & BUSHING FOR TWIST DRILL 2x38mmCMT 364.020.00 ADAPTER & BUSHING FOR TWIST DRILL 2x38mm
    Prime
    CMT 364.020.00 ADAPTER & BUSHING FOR TWIST DRILL 2x38mm
    For use with the following items: 363 HW.   TECHNICAL DETAILS: • Super-strength steel. • Quick and secure assembly on twist drills. • Precision relief. • Parallel shank with driving flat.
    $11.40
    $20.80
    $11.40
  • CMT 362.080.12 DOWEL DRILL 5/16”x44x77mm LHCMT 362.080.12 DOWEL DRILL 5/16”x44x77mm LH
    Prime
    CMT 362.080.12 DOWEL DRILL 5/16”x44x77mm LH
    TECHNICAL DETAILS: • Super-strength steel. • ???????Spiral portion coated with orange or black P.T.F.E. • ??????????????HW head with precision balanced centre point. • ??????????????2 HW precision ground cutting edges (Z2). • ??????????????2 negatively ground spurs (V2). • ??????????????2 spiral flutes. • ??????????????Parallel shank with...
    $18.40
    $33.50
    $18.40
  • CMT 360.101.00 ADAPTER 18x17.5x10mm RH-LHCMT 360.101.00 ADAPTER 18x17.5x10mm RH-LH
    Prime
    CMT 360.101.00 ADAPTER 18x17.5x10mm RH-LH
    TECHNICAL FEATURES: High precision and total reliability. Perfectly centred. Defect-free rotation. Super-strength steel. Precision relief on all surfaces. Quick drill change. Adaptable to many different spindle nose designs.
    $21.60
    $39.30
    $21.60
  • CMT 314.095.12 DOWEL DRILL FOR THROUGH HOLE 3/8”2x35x70mm LHCMT 314.095.12 DOWEL DRILL FOR THROUGH HOLE 3/8”2x35x70mm LH
    Prime
    CMT 314.095.12 DOWEL DRILL FOR THROUGH HOLE 3/8”2x35x70mm LH
    TECHNICAL DETAILS: -Super-strength steel. -Spiral portion coated with orange or black P.T.F.E. -HW head with precision balanced centre point. -2 precision ground cutting edges (Z2). -2 spiral flutes. -Parallel shank with driving flat and length adjusting screw.
    $23.80
    $43.20
    $23.80