skarpaz

The Skarpaz FT4510A is a 450mm 100-tooth Finish Trim Blade with a 10° hook ATB (alternate top bevel) tooth. Use it when the finest cut is required on thin material. It excels in miter applications and when sizing thin sheets of stock. Suggested machines:...

The Skarpaz FT4512AR is a 455mm 120-tooth Finish Trim Blade with a 10° hook ATB+R (alternate top bevel with raker) tooth. Use it when the finest cut is required on thin material. It excels in miter applications and when sizing thin sheets of stock....

The Skarpaz G1024A-125 is a 10" 24-tooth Glue Line Rip Blade with a 20° hook ATB (alternate top bevel) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1030T is a 10" 30-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1230T is a 12" 30-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1236T-160 is a 12" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1236T-170 is a 12" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1248A is a 12" 48-tooth Glue Line Rip Blade with a 20° hook ATB (alternate top bevel) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1436T-2 is a 14" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1436T is a 14" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1440A is a 14" 40-tooth Glue Line Rip Blade with a 20° hook ATB (alternate top bevel) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1440T is a 14" 40-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1636T-2 is a 16" 36-tooth glue line rip blade with a 20° TCG (triple chip grind) tooth, built for straight line ripping where a glue joint is required. TCG is the recommended grind for hardwoods and composite boards, and the blade suits...

The Skarpaz G1636T is a 16" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1836T-2 is an 18" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G1836T is an 18" 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G2040T-2 is a 20" 40-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G3036T is a 300mm 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz G3536T-30 is a 350mm 36-tooth Glue Line Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for straight line ripping where a glue joint is required. TCG is recommended for hardwoods and composite boards and ATB for softer...

The Skarpaz GP1040A is a 10" 40-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1040T is a 10" 40-tooth general purpose blade with a 10° TCG (triple chip grind) tooth, a good all-round choice for both ripping and crosscutting when a higher feed rate is required. The TCG tooth works well in hardwood, plywood, particleboard, MDF...

The Skarpaz GP1240A is a 12" 40-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1240T is a 12" 40-tooth General Purpose Blade with a 10° hook TCG (triple chip grind) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1248A is a 12" 48-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1440A is a 14" 40-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1440T is a 14" 40-tooth General Purpose Blade with a 10° hook TCG (triple chip grind) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1448A is a 14" 48-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1640A is a 16" 40-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1640T is a 16" 40-tooth General Purpose Blade with a 10° hook TCG (triple chip grind) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP1848A is an 18" 48-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP2260A is a 22" 60-tooth General Purpose Blade with a 15° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP2460A-184 is a 24" 60-tooth General Purpose Blade with a 15° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP2460A-200 is a 24" 60-tooth General Purpose Blade with a 15° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP7A is a 7-1/4" 24-tooth General Purpose Blade with a 15° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP840A is an 8" 40-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GP840T is an 8" 40-tooth General Purpose Blade with a 10° hook TCG (triple chip grind) tooth. Use it for both ripping and crosscutting when a higher feed rate is required. It is a good all-round blade for either job. Suggested machines:...

The Skarpaz GR1030 is a 10" 30-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1040T-318 is a 10" 40-tooth Gang Rip Blade with a 15° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...

The Skarpaz GR1040T-3 is a 10" 40-tooth Gang Rip Blade with a 15° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...

The Skarpaz GR1040T-4 is a 10" 40-tooth Gang Rip Blade with a 15° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...

The Skarpaz GR1224-125 is a 12" 24-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1224-134 is a 12" 24-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1224-145 is a 12" 24-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1224-318 is a 12" 24-tooth Gang Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...

The Skarpaz GR1228 is a 12" 28-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1230-134 is a 12" 30-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1236 is a 12" 36-tooth Gang Rip Blade with a 20° hook Flat Top tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique requirements. Suggested...

The Skarpaz GR1236T-125 is a 12" 36-tooth Gang Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...

The Skarpaz GR1236T-160/70 is a 12" 36-tooth Gang Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...

The Skarpaz GR1236T-160 is a 12" 36-tooth Gang Rip Blade with a 20° hook TCG (triple chip grind) tooth. Use it for domestic and European multi-tip gang rip machines. It is offered in a variety of kerfs and tooth counts to suit many unique...