skarpaz

The Skarpaz Orion 2208-SP is a 3/4" diameter 2-Flute Straight Plunge Router Bit with a 2" cut length and a 1/2" shank (3-3/4" overall length). It plunges directly into the stock for grooves, dados and mortises. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion 2488-SP is a 1/2" diameter 2-Flute Straight Plunge Router Bit with a 1-1/2" cut length and a 1/2" shank (3-1/8" overall length). It plunges directly into the stock for grooves, dados and mortises. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion 2525-PP is a 1/4" diameter 1-Flute Panel Pilot Router Bit with a 3/4" cut length and a 1/4" shank. It uses a solid panel pilot to trim to a template or panel edge. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion 2525-SCC is a 1/4" diameter Solid Carbide Compression Router Bit with a 1" cut length and a 1/4" shank (2-1/2" overall length). It is a solid carbide compression bit that shears upward and downward for a clean top and bottom surface...

The Skarpaz Orion 2525-SCDS is a 1/4" diameter Solid Carbide Down Shear Router Bit with a 1" cut length and a 1/4" shank (2-1/2" overall length). It is a solid carbide down shear bit that pushes chips down for a clean top surface. Use...

The Skarpaz Orion 2705-LH is a 5mm left hand rotation metric brad point boring bit with a 10mm shank and 57mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 2705-RH is a 5mm right hand rotation metric brad point boring bit with a 10mm shank and 57mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 2708-LH is an 8mm left hand rotation metric brad point boring bit with a 10mm shank and 57mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 3268-SP is a 3/8" diameter 2-Flute Straight Plunge Router Bit with a 1-1/8" cut length and a 1/2" shank (3" overall length). It plunges directly into the stock for grooves, dados and mortises. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion 3288-FT is a 1/2" diameter 2-Flute Flush Trim Router Bit w/ Ball Bearing Guide with a 2" cut length and a 1/2" shank (4-1/4" overall length). It rides the bearing along a template or the edge of the workpiece to trim...

The Skarpaz Orion 3288-SP is a 1/2" diameter 2-Flute Straight Plunge Router Bit with a 2" cut length and a 1/2" shank (4-1/4" overall length). It plunges directly into the stock for grooves, dados and mortises. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion 4088-SP is a 1/2" diameter 2-Flute Straight Plunge Router Bit with a 2-1/2" cut length and a 1/2" shank (4-1/2" overall length). It plunges directly into the stock for grooves, dados and mortises. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion 51200 is a 1/4" diameter Panel Pilot Router Bit with a 1/4" cut length and a 1/4" shank (1-1/2" overall length). It uses a solid panel pilot to trim to a template or panel edge. Use it in handheld or table-mounted...

The Skarpaz Orion 51202 is a 1/4" diameter Panel Pilot Router Bit with a 1/4" cut length and a 1/4" shank (1-1/2" overall length). It uses a solid panel pilot to trim to a template or panel edge. Use it in handheld or table-mounted...

The Skarpaz Orion 51204 is a 1/4" diameter Panel Pilot Router Bit with a 1/4" cut length and a 1/4" shank (1-1/2" overall length). It uses a solid panel pilot to trim to a template or panel edge. Use it in handheld or table-mounted...

The Skarpaz Orion 5735R-EH is a 35mm right hand rotation european hinge boring bit with a 10mm shank and 57mm overall length. It bores the cup hole for European style hinges. More Information Cut Diameter 35mm Shank Diameter 10mm Overall Length 57mm Rotation Right...

The Skarpaz Orion 7005-LH is a 5mm left hand rotation metric brad point boring bit with a 10mm shank and 70mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 7005-LHV is a 5mm left hand rotation metric v-point boring bit with a 10mm shank and 70mm overall length. It is a metric V-point boring bit. Left hand rotation bits are orange and right hand rotation bits are black. More Information...

The Skarpaz Orion 7005-RH is a 5mm right hand rotation metric brad point boring bit with a 10mm shank and 70mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 7005-RHV is a 5mm right hand rotation metric v-point boring bit with a 10mm shank and 70mm overall length. It is a metric V-point boring bit. Left hand rotation bits are orange and right hand rotation bits are black. More Information...

The Skarpaz Orion 7008-LH is an 8mm left hand rotation metric brad point boring bit with a 10mm shank and 70mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 7008-LHV is an 8mm left hand rotation metric v-point boring bit with a 10mm shank and 70mm overall length. It is a metric V-point boring bit. Left hand rotation bits are orange and right hand rotation bits are black. More Information...

The Skarpaz Orion 7008-RH is an 8mm right hand rotation metric brad point boring bit with a 10mm shank and 70mm overall length. It is a metric brad point bit for boring clean, accurate holes. Left hand rotation bits are orange and right hand...

The Skarpaz Orion 7008-RHV is an 8mm right hand rotation metric v-point boring bit with a 10mm shank and 70mm overall length. It is a metric V-point boring bit. Left hand rotation bits are orange and right hand rotation bits are black. More Information...

The Skarpaz Orion BA1214 is a replacement ball bearing for router bits, with a 1/2" outside diameter and 1/4" inside diameter. More Information Outside Diameter 1/2" Inside Diameter 1/4"

The Skarpaz Orion BA1236 is a replacement ball bearing for router bits, with a 1/2" outside diameter and 3/16" inside diameter. More Information Outside Diameter 1/2" Inside Diameter 3/16"

The Skarpaz Orion BA3412 is a replacement ball bearing for router bits, with a 3/4" outside diameter and 1/2" inside diameter. More Information Outside Diameter 3/4" Inside Diameter 1/2"

The Skarpaz Orion BA3814 is a replacement ball bearing for router bits, with a 3/8" outside diameter and 1/4" inside diameter. More Information Outside Diameter 3/8" Inside Diameter 1/4"

The Skarpaz Orion BA3818 is a replacement ball bearing for router bits, with a 3/8" outside diameter and 1/8" inside diameter. More Information Outside Diameter 3/8" Inside Diameter 1/8"

The Skarpaz Orion BA38316 is a replacement ball bearing for router bits, with a 3/8" outside diameter and 3/16" inside diameter. More Information Outside Diameter 3/8" Inside Diameter 3/16"

The Skarpaz Orion BA38532 is a replacement ball bearing for router bits, with a 3/8" outside diameter and 5/32" inside diameter. More Information Outside Diameter 3/8" Inside Diameter 5/32"

The Skarpaz Orion CB-1004 is a 30mm diameter 45° Chamfer Router Bit with a 1/2" cut length and a 1/4" shank (2" overall length). It cuts a 45 degree chamfer on the edge of the work. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion CB-1808 is a 2" diameter 45° Chamfer Router Bit with a 7/8" cut length and a 1/2" shank (2-1/2" overall length). It cuts a 45 degree chamfer on the edge of the work. Use it in handheld or table-mounted routers. More...

The Skarpaz Orion CTCS01103 is a 1/8" diameter carbide tipped countersink for #10 screws with a 3/8" countersink. It drills a pilot hole and countersink for a screw in one pass. More Information Cut Diameter 1/8" Screw No. 10 Countersink 3/8"

The Skarpaz Orion OR1010AR is a 10" 100-tooth Thin Kerf Portable Miter Blade with a neutral hook ATB+R (alternate top bevel with raker) tooth. Use it on portable miter saws, where the thin kerf takes less power and removes less material. Suggested machines: miter...

The Skarpaz Orion OR1010NT is a 10" 100-tooth Non-Ferrous Metal Cutting Blade with a negative 5° hook TCG (triple chip grind) tooth. Use it to cut aluminum, brass, copper and other non-ferrous metals. Use lubricant and mechanical clamping when cutting metal. It has a...

The Skarpaz Orion OR1012T is a 10" 120-tooth Non-Ferrous Metal Cutting Blade with a negative 2° hook TCG (triple chip grind) tooth. Use it to cut aluminum, brass, copper and other non-ferrous metals. Use lubricant and mechanical clamping when cutting metal. It has a...

The Skarpaz Orion OR1014SC is a 10-1/4" 36-tooth Speed Cut Portable Saw Blade with a 20° hook ATB-S (alternate top bevel, anti-kickback) tooth. Use it as a high quality, commercial grade blade for cordless, handheld and portable saws. It has a .070" plate, a...

The Skarpaz Orion OR1024 is a 10" 24-tooth Rip Blade with a 20° hook Flat Top tooth. Use it for ripping solid wood. TCG versions produce glue joint rip cuts. Suggested machines: table saw. It has a .085" plate, a .125" kerf and a...

The Skarpaz Orion OR1024AT is a 10" 24-tooth Rip Blade with a 20° hook ATB (alternate top bevel) tooth. Use it for ripping solid wood. TCG versions produce glue joint rip cuts. Suggested machines: table saw. It has a .070" plate, a .100" kerf...

The Skarpaz Orion OR1030T is a 10" 30-tooth rip blade with a 20° hook TCG (triple chip grind) tooth, designed to produce glue-joint quality rip cuts in solid hardwoods and softwoods. The deep gullets clear chips quickly for aggressive, clean ripping on a table...

The Skarpaz Orion OR1040A is a 10" 40-tooth General Purpose Blade with a 10° hook ATB (alternate top bevel) tooth. Use it as an all-round blade for ripping and crosscutting. It has a .085" plate, a .125" kerf and a 5/8" arbor. The plate...

The Skarpaz Orion OR1040SC-1 is a 10" 40-tooth Speed Cut Portable Saw Blade with a 15° hook AT/FB (alternate top bevel with alternate face bevel) tooth. Use it as a high quality, commercial grade blade for cordless, handheld and portable saws. It has a...

The Skarpaz Orion OR1040SC is a 10" 40-tooth Speed Cut blade, a commercial grade thin kerf design for portable and handheld saws. The 15° AT/FB grind (alternate top bevel with alternate face bevel) and a slim .100" kerf keep the cut fast and light...

The Skarpaz Orion OR1040T is a 10" 40-tooth General Purpose Blade with a 10° hook TCG (triple chip grind) tooth. Use it as an all-round blade for ripping and crosscutting. It has a .085" plate, a .125" kerf and a 5/8" arbor. The plate...

The Skarpaz Orion OR1050 is a 10" 50-tooth Combination Blade with a 15° hook Combination tooth. Use it as a combination blade that both rips and crosscuts. It has a .085" plate, a .125" kerf and a 5/8" arbor. The plate is laser cut...

The Skarpaz Orion OR1060A is a 10" 60-tooth Cross Cut Blade with a 10° hook ATB (alternate top bevel) tooth. Use it for smooth, low-tear crosscuts in solid wood, plywood and veneered panels. It has a .085" plate, a .125" kerf and a 5/8"...

The Skarpaz Orion OR1060AR is a 10" 60-tooth Thin Kerf Portable Miter Blade with a 5° hook ATB+R (alternate top bevel with raker) tooth. Use it on portable miter saws, where the thin kerf takes less power and removes less material. Suggested machines: miter...

The Skarpaz Orion OR1060SC is a 10" 60-tooth Speed Cut Portable Saw Blade with a 15° hook AT/FB (alternate top bevel with alternate face bevel) tooth. Use it as a high quality, commercial grade blade for cordless, handheld and portable saws. It has a...

The Skarpaz Orion OR1060T is a 10" 60-tooth Cross Cut Blade with a 10° hook TCG (triple chip grind) tooth. Use it for smooth, low-tear crosscuts in solid wood, plywood and veneered panels. It has a .085" plate, a .125" kerf and a 5/8"...